Roland V-4EX Owner's Manual download pdf (Page 56)

Appendices

Calibrating and Changing the Installed Orientation of the Video Fader

Calibrating the Video Fader

After repeated use of the V-4EX, you may nd that 100% of the image is not output even when you’ve moved the video fader all the

way toward A-Bus or B-Bus. If this occurs, perform calibration of the video fader.

1. Move to the A-Bus end.

Move the video fader all the way toward the A-Bus position.

2. Access the SETUP menu.

Press the [MENU] button to access the menu screen, then use the touch panel to select [SETUP].

g.utility-menu.eps

3. Calibrate the A-Bus position.

Select [Video Fader Calibrate A] and press the [VALUE] dial. The display changes to a conrmation screen. Press the [VALUE] dial

once more.

g.calibrate-menu.eps

4. Move to the B-Bus end.

Move the video fader all the way to the B-Bus position.

5. Calibrate the B-Bus position.

Select [Video Fader Calibrate B] and press the [VALUE] dial. The display changes to a conrmation screen. Press the [VALUE] dial

once more.

6. Go back to the original screen.

Press the [MENU] button several times to quit the menu screen and go back to the original screen.

1 ... 55 56 57 58 59 60 61 62 63 64

No comments

Roland V-4EX Owner's Manual Page 56