Roland V-4EX Owner's Manual download pdf (Page 32)

You can apply lter eects to the video on A-Bus by using the A-Bus Eect buttons. By default, the following lter eects are

assigned to 1 through 4.

FEEDBACK This repeats layering of the picture upon itself.

NEGATIVE This inverts the colors or brightness levels of the picture.

COLORIZE This eect adds color to the picture, producing a painting-like feel.

MULTI This splits the screen and reduces the size of the pictures.

g.A-bus-eects.eps

You can display a screen for assigning other eects by pressing the [EFFECTS] button.

1. Output the video to which you want to apply an eect.

Select and output the A-Bus channel you want to apply an eect.

2. Select the eect to apply.

Use the A-Bus Eect buttons to select the eect to apply.

g.select-lter-eect.eps

3. Adjust the amount of eect.

Turn the A-Bus Eect Control dial to adjust the amount of eect.

g.A-bus-control-dial.eps

The default lter eects change as follows when you turn the Eect Control dial.

FEEDBACK Turning the control clockwise shortens the repeating interval.

NEGATIVE

Turning the dial clockwise cycles through these settings: brightness inversion -> color inversion -> brightness and color

inversion.

COLORIZE The colorization pattern varies according to the position of the dial.

MULTI Turning the dial clockwise increases the number of screen divisions.

By default, in addition to the four types of lter eects just described, [FLIP] is assigned to a B-Bus Eect button. When using this eect, select the

video on B-Bus. Pressing the B-Bus [FLIP] Eect button applies the ip eect. Also, to adjust the parameter of eect (or to change the direction of

screen ipping), use the B-Bus Eect Control dial.

Applying Filter Eects to Video

1 ... 31 32 33 ... 64

Comments to this Manuals

No comments

Roland V-4EX Owner's Manual Page 32

Comments to this Manuals

Related products and manuals for Mixers Roland V-4EX