Roland V-4EX Owner's Manual download pdf (Page 24)

By default, the HDCP (High-bandwidth Digital Content Protection) setting of the V-4EX is turned o. This means that HDCP-

applied signals from Blu-ray Disc players and the like cannot be input. When inputting signals to which HDCP is applied, follow the

procedure shown below to change the setting.

* HDCP is copyright-protection technology that prevents unlawful copying of content by encoding the path when sending digital signals from a

video playback device to a display monitor or other display equipment.

1. Display the SETUP menu.

Press the [MENU] button to display the menu. Use the touch panel to select [SETUP].

g.open-system-menu.eps

2. Change the setting.

Use the [VALUE] dial or the touch panel to select [HDCP]. Turn the [VALUE] dial to change the setting from [OFF] to [ON]. When the

conrmation screen appears, press the [VALUE] dial or use the touch panel to conrm the change.

g.HDCP-setting.eps

3. Exit the menu.

Press the [MENU] button several times to quit the menu.

When the setting change just described has been made, video output from the composite connector, the RGB/COMPONENT connector and the

USB port is stopped. Note, however, that HDCP-applied signals are output via the HDMI connector. Preview output also continues.

g.HDCP-signal-ow.eps

RGB/COMPONENT

VIDEO

HDMI

RGB/COMPONENT

VIDEO

HDMI

USB USB

About the HDCP Indicator

The [HDCP] indicator on the top panel operates as described below.

• It lights up when an HDCP-compatible device is connected as the output device.

• It ashes when nothing is connected or when the connected device is not compatible with HDCP.

• It goes dark when [HDCP] is set to [OFF].

Inputting HDCP Signals

1 ... 23 24 25 ... 64

No comments

Roland V-4EX Owner's Manual Page 24