Roland PC-50 User Manual download pdf (Page 11)

Use the same procedure to change to the BLACK (CR-BK) and YELLOW (CR-YE) ribbon cartridges.

The CHANGE LED

blink

When the CYAN printing is

finished, the carriage indicates

the next color (BLACK) and

stops.

Replace the MAGENTA (CR-

MG) cartridge with the CYAN

(CR-CY) cartridge, then press

the CHANGE key.

CYAN

(CR-CY)

When the MAGENTA

printing is finished, the

carriage indicates the next

color (CYAN) and stops.

First install the MAGENTA

(CR-MG) ribbon cartridge.

MAGENTA

(CR-MG)

Press the CHANGE key.

When data is sent, the

carriage first specifies

MAGENTA and stops.

The CHANGE LED

blink

The CHANGE LED

blink

* If any of the four colors (C, M, Y, or K) is not used, the PC-50 does not stop at that color.

Special color Printing

This is used to add emphasis to some areas, or when printing with limited colors. Special-color ribbon cartridges are sold separately.

When the ribbon cartridge needs to be changed, the carriage stops at SPECIAL COLOR.

For more details, please refer to the operator's manual for the software driver, or to online help.

5 Basic Operation

When CR-CY, MG, YE, and BK ribbon cartridges are used for printing, the PC-50 performs printing in the following color sequence:

MAGENTA (M) CYAN (C) BLACK (K) YELLOW (Y)

Follow the steps below to install and change the ribbon cartridges.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 24 25

No comments

Roland PC-50 User Manual Page 11