Roland Prelude User Manual download pdf (Page 73)

This effect provides four delays. Each of the Delay Time parameters

can be set to a note length based on the selected tempo. You can also

set the panning and level of each delay sound.

fig.MFX-49

This is a reverse delay that adds a reversed and delayed sound to the

input sound. A tap delay is connected immediately after the reverse

delay.

fig.MFX-50

Adds a shuffle to the delay sound, giving the sound a bouncy delay

effect with a swing feel.

fig.MFX-51

49: MULTI TAP DELAY

Parameter Value Description

Delay 1–4 Time

0–2600 ms,

note

Adjusts the time until Delays 1–4 are

heard.

Delay 1

Feedback

-98– +98%

Adjusts the amount of the delay sound

that’s fed back into the effect. Negative (-)

settings invert the phase.

HF Damp

200–8000 Hz,

BYPASS

Adjusts the frequency above which sound

fed back to the effect is filtered out. If you

don’t want to filter out any the high fre-

quencies, set this parameter to BYPASS.

Delay 1–4 Pan L64–63R Stereo location of Delays 1–4

Delay 1–4 Level 0–127 Output level of Delays 1–4

Low Gain -15– +15 dB Gain of the low frequency range

High Gain -15– +15 dB Gain of the high frequency range

Balance

D100:0W–

D0:100W

Volume balance between the direct sound

(D) and the effect sound (W)

Level 0–127 Output level

50: REVERSE DELAY

Parameter Range Explanation

Threshold 0–127

Volume at which the reverse de-

lay will begin to be applied

Rev Delay Time 0–1300 ms, note

Delay time from when sound is

input into the reverse delay until

the delay sound is heard

Rev Delay

Feedback

-98– +98%

Proportion of the delay sound

that is to be returned to the input

of the reverse delay (negative

values invert the phase)

Rev Delay HF

Damp

200–8000 Hz,

BYPASS

Frequency at which the high-fre-

quency content of the reverse-de-

layed sound will be cut (BYPASS:

no cut)

Rev Delay Pan L64–63R

Panning of the reverse delay

sound

Rev Delay Level 0–127

Volume of the reverse delay

sound

L in

R in

L out

R out

Multi Tap Delay

Balance W

Balance D

Balance W

Balance D

Delay 1

Delay 3

Delay 4

Delay 2

Feed

back

2-Band

Feedback

L in

R in

Rev. Delay

L out

R out

2-Band

Rev

Delay

Delay 1 – 3 Time 0–1300 ms, note

Delay time from when sound is

input into the tap delay until the

delay sound is heard

Delay 3 Feedback

-98– +98%

Proportion of the delay sound

that is to be returned to the input

of the tap delay (negative values

invert the phase)

Delay HF Damp 200–8000 Hz, BYPASS

Frequency at which the low-fre-

quency content of the tap delay

sound will be cut (BYPASS: no

cut)

Delay 1 Pan’,

‘Delay 2 Pan

L64–63R Panning of the tap delay sounds

Delay 1 Level’,

‘Delay 2 Level

0–127 Volume of the tap delay sounds

Low Gain -15– +15 dB

Amount of boost/cut for the low-

frequency range

High Gain -15– +15 dB

Amount of boost/cut for the high-

frequency range

Balance D100:0W–D0:100W

Volume balance of the original

sound (D) and delay sound (W)

Level 0–127 Output volume

51: SHUFFLE DELAY

Parameter Value Description

Delay Time

0–2600 ms,

note

Adjusts the time until the delay sound is

heard.

Shuffle

Rate

0–100%

Adjusts the ratio (as a percentage) of the

time that elapses before Delay B sounds rel-

ative to the time that elapses before the De-

lay A sounds.

When set to 100%, the delay times are

the same.

Acceleration 0–15

Adjusts the speed which the Delay Time

changes from the current setting to its speci-

fied new setting.

Feedback -98– +98%

Adjusts the amount of the delay that’s fed

back into the effect. Negative (-) settings in-

vert the phase.

HF Damp

200–8000 Hz,

BYPASS

Adjusts the frequency above which sound

fed back to the effect is filtered out. If you

don’t want to filter out any high frequencies,

set this parameter to BYPASS.

Pan A/B 0–127 Stereo location of Delay A/B

Level A/B 0–127 Volume of delay A/B

Low Gain -15– +15 dB Gain of the low frequency range

High Gain -15– +15 dB Gain of the high frequency range

Balance

D100:0W–

D0:100W

Volume balance between the direct sound

(D) and the effect sound (W)

Level 0–127 Output level

Parameter Range Explanation

Feedback

L in

R in

Delay

L out

R out

2-Band

Delay A

Delay B

Prelude_e.book Page 73 Wednesday, January 14, 2009 2:18 PM

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 111 112

Comments to this Manuals

No comments

Roland Prelude User Manual Page 73

Comments to this Manuals

Related products and manuals for Digital pianos Roland Prelude