Roland FC-300 Owner's Manual download pdf (Page 42)

Patch Mode

You can freely change the settings for each pedal.

In the Patch Mode’s top screen, press PARAMETER [ ].

Press PARAMETER [ ] [ ] to select the each pedal settings screen.

The pedals being set appear at the left and upper of the screen.

You can set the following parameters:

• ON Stream (Only when assigned to the FC-300’s CTL pedals)

• OFF Stream (Only when assigned to the FC-300’s CTL pedals)

• Control Change Message (The pedal can be assigned to up to six messages.)

• Amp Control

Press VALUE [ ] [ ] to change the value.

Setting the ON Stream and OFF Stream

You can assign these in the same manner as MIDI streams set as patch parameters.

(p. 34) However, the timing for transmission of OFF streams follows the settings

made in Pedal mode. You can set ON streams and OFF streams only with the FC-

300’s CTL pedals.

Assign Number

The EXP PEDAL and EXP PEDAL SW can be assigned to up to six messages to be

transmitted. You can also assign one message to be transmitted to each of the pedals

connected to the rear panel’s EXP PEDAL/CTL jacks and FC-300’s CTL pedals.

MIDI Channel

This sets the MIDI channel for the messages being transmitted.

MIDI Messages

This sets the range for values that are transmitted.

• Off

These do not output MIDI messages.

• CC#1 – CC#31, CC#33 – CC#95

These output Control Change messages.

When used to an expression pedal, consecutive values are output within the

range set with the Range parameter. When used to a control pedal, the

maximum value is output when the switch is on, and the minimum value is

output when the switch is off.

• MIDI START / MIDI STOP / MIDI CONTINUE / MMC STOP / MMC PLAY /

MMC DEF PLAY / MMC FAST FWD / MMC REWIND / MMC REC STROBE /

Change the Pedal Settings

Assign Number

MIDI Message

MIDI Channel

When the MIDI channel is set

to Tx, the channel set with the

MIDI:Tx Channel parameter in

Utilities is set (p. 52).

FC-300_e2.book 42 ページ２００７年１０月４日　木曜日　午後５時２２分

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 71 72

Comments to this Manuals

No comments

Roland FC-300 Owner's Manual Page 42

Comments to this Manuals

Related products and manuals for Music Pedal Roland FC-300