Roland SJ-600 User Manual Page 109

  • Download
  • Add to my manuals
  • Print
  • Page
    / 116
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 108
107
Chapter 6 Specifications
6-4 Specifications
Printing method
Loadable media width
Printable area
Ink Type
Colors
Resolution
Printing speed
Distance accuracy
(*1)
Media take-up Roll outer diameter
system
Roll weight
Media feed system Roll outer diameter
Roll weight
Media dryer
Ink-fixing device
Interface
Power-saving function
Power supply Voltage and frequency
Required power capacity
Power consumption
During operation
Sleep mode
Acoustic noise level
During operation
During standby
Dimensions
Weight
Environment Power on
(*2)
Power off
Included items
SJ-1045EX
Piezo ink-jet method
1220 to 2641 mm (48 to 104 in.)
Maximum width: 2600 mm (102.3 in.)
Exclusive ECO-SOL INK
4 colors (cyan, magenta, yellow, and black)
Maximum 1440 dpi
Maximum approx. 45 m
2
/h
Error of less than ±0.3% of distance traveled, or 0.3 mm, whichever is
greater
Maximum 250 mm (9.8 in.)
Maximum 100 kg (220 lb.)
Maximum 250 mm (9.8 in.)
Maximum 100 kg (220 lb.)
Heating method
Preheater and print heater
Ethernet (10BASE-T/100BASE-TX, automatic switching)
Automatic sleep
AC 200 to 240 V ±10%, 50/60 Hz
10 A
Approx. 2400 W
Approx. 55 W
65 dB (A) or less (according to ISO 7779)
40 dB (A) or less (according to ISO 7779)
3894 (W) x 1159 (D) x 1394 (H) mm (153.4 (W) x 45.7 (D) x 54.9 (H) in.)
455 kg (1003 lb.)
Temperature: 20 to 32˚C (68 to 89.6˚F), humidity: 35 to 80% (no con-
densation)
Temperature: 5 to 40˚C (41 to 104˚F), humidity: 20 to 80% (no conden-
sation)
Power cord, roll shafts, end caps, spacers, media reinforcement pipe,
paper pipe, drain bottle, media gauge, media clamps, hexagonal
wrenches, cap-unit tool, cleaning kit, cleaning liquid cartridges, soft-
ware RIP, Roland-PrintServer CD-ROM, User's Manual, Setup Guide,
Roland-PrintServer Network Settings Guide
Use in an operating environment with this range.
Temperature
Humidity
*1
At Roland PET film, print travel: 1 m
Temperature: 25°C (77°F), humidity: 50%
Not assured when the print heater, preheater or dryer is used.
*2
Operating environment
Page view 108

Comments to this Manuals

No comments