Roland SJ-600 User Manual download pdf (Page 46)

2-4 Starting Printing

Chapter 2 Operation

Printing Tests and Cleaning

We recommend performing a printing test to check for problems such as dot drop-out before you carry out

actual printing. If problems such as dot drop-out are found, clean the print heads.

How to Perform a Printing Test

Holding down for one second or longer prints a test

pattern.

You can print the test pattern where you want by

using

to move the print heads,

then pressing

. The front cover may be open during

movement, but be sure to close it before you press

How to Perform Cleaning

Closing the front cover and holding down for one second or longer

performs cleaning for the heads. When the operation ends, press

then

to go back to the initial screen.

It may be a good idea to perform a printing test again to make sure the dot

drop-out has been corrected. If the problem persists, try performing clean-

ing a second time. If the problem doesn't go away even after performing

cleaning two or three times, then try cleaning using a different method.

☞ p 53 "When Head Cleaning Is Not Effective"

Dot drop-out

Hold down for one second

or longer.

Printing test

Hold down for one second

or longer.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 115 116

No comments

Roland SJ-600 User Manual Page 46