Roland VersaCamm VP-540i Specifications Page 101
- Page / 136
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
100
Chapter 4 Feature Reference
4-9 Performing Printing and Cutting Separately
5.
From the test pattern, read the correction value at the location.
6.
Enter the correction value you read.
➊
Press .
➋
Press .
Use
to set the correction value for [F] (the
feed direction).
Use
to set the correction value for [S] (the
scanning direction).
Press
to enable the setting.
➌
Press .
7.
Check the results of adjustment.
Press .
Press
to execute.
If the printing and cutting lines are aligned, adjustment is com-
plete.
If further adjustment is needed, go back to step
6. and fine-tune the
adjustment.
Description
Depending on the composition of the media, the positioning of printing and cutting may be misaligned even when
you're using crop marks. Make corrections for misaligned printing and cutting for the media you're using.
Default Setting
[F] (feed direction): 0.00 mm
[S] (scanning direction): 0.00 mm
+2.0 -2.0
-1.0
+0.5 -0.5
+0.0 -0.0
+1.5 -1.5
+2.0
-2.0
+1.0
-1.0
+0.5
-0.5
+0.0
-0.0
+1.5
-1.5
FEED
SCAN
-0.5
Test pattern Check the value on
the [SCAN] side.
Correction-value scale
Check the value on
the [FEED] side.
Cutting line
The point where the cutting line
intersects the correction-value
scale is the correction value. In this
figure, the value is "-0.3." Use the
same method to read the value on
the [FEED] side.
Cutting line
Scan direction
F :- 0.30 - 0.30mm
S : 0.00 - 0.20mm
CROP - CUT ADJ.
SETTING
CROP - CUT ADJ.
SETTING
CROP - CUT ADJ.
TEST PRINT
Printing position
Cutting position
Cutting position and print-
ing position are aligned.
- For the USA 3
- For Canada 3
- Contents 4
- To Ensure Safe Use 7
- Warning Labels 13
- Avis sur les avertissements 14
- ATTENTION 14
- PRUDENCE 14
- À propos des symboles 14
- Printer Unit 21
- Ink Cartridges 22
- Chapter 1 24
- Introduction 24
- 1-1 Introduction 25
- 1-2 Part Names and Functions 26
- Chapter 1 Introduction 27
- Operation Panel 28
- Chapter 2 30
- Operation 30
- The Power-saving Feature 32
- Loading Media 33
- OK Not OK 34
- Chapter 2 Operation 35
- Close the front cover 37
- PINCHROLL ERROR 38
- XXX FROM RIGHT 38
- INVALID *** POS 38
- Cutting Off the Media 39
- General Guide for Adjustment 41
- 2-4 Starting Output 42
- Printing Tests and Cleaning 43
- 2-5 If Ink Runs Out 44
- If Ink Runs Out 45
- 2-6 Performing Cutting 46
- Performing a Cutting Test 47
- Chapter 2 Operation 48
- Chapter 3 50
- Maintenance and Adjustment 50
- Disposing of Discharged Ink 51
- Press a second time 52
- Cleaning 53
- Start cleaning 54
- How to Perform Cleaning 55
- Remove the side cover 56
- Replacing the Wipers 59
- Detach the old wipers 60
- Insert the new wipers 60
- Attach the hook 60
- Attach the side cover 61
- Replacing the Blade 62
- SETUP SHEET 63
- Replace the separating knife 64
- Keep Performing Maintenance 66
- Chapter 4 68
- Feature Reference 68
- Procedure 69
- Description 69
- Loading a Saved Preset 72
- Assigning a Name to a Preset 72
- Print a test pattern 74
- Enter the correction value 77
- Using Transparent Media 79
- Printing Hard-to-dry Media 79
- How to Load Sheet Media 83
- Deactivating the Sleep Mode 86
- 6. and fine-tune 94
- Default Setting 95
- Printing with Crop Marks 96
- Aligning Manually and Cutting 98
- Set the align points 99
- Chapter 4 Feature Reference 100
- 6. and fine-tune the 101
- Viewing the Network Settings 105
- Printing a System Report 106
- 4-12 Performing Maintenance 107
- 4-13 Menu List 109
- Language and Unit Menu 113
- Function Menu 114
- What to Do If 116
- Chapter 5 116
- Chapter 5 What to Do If 117
- Colors Are Unstable or Uneven 118
- 5-3 The Media Jams 120
- Media Wrinkles or Shrinks 121
- Media Feed Is Not Straight 121
- Media Feed Is Not Smooth 121
- What to Do First 122
- 5-6 If a Message Appears 123
- Chapter 6 128
- Specifications 128
- 6-1 Usable Media 129
- 6-2 Printing/Cutting Area 130
- Chapter 6 Specifications 131
- 6-3 About the Blade 132
- 6-5 Specifications 134
Related products and manuals for Print & Scan Roland VersaCamm VP-540i
Print & Scan Roland FJ-40 User Manual
(99 pages)
(99 pages)
Print & Scan Roland CJ-540 Specifications
(32 pages)
(32 pages)
Print & Scan Roland VS-540 User Manual
(2 pages)
(2 pages)
Print & Scan Roland RA-640 Setup Guide
(56 pages)
(56 pages)
Print & Scan Roland XC-540MT User Manual
(172 pages)
(172 pages)
Print & Scan Roland XR-640 Setup Guide
(60 pages)
(60 pages)
Print & Scan Roland COLORCHOICE User's Guide
(50 pages)
(50 pages)
Print & Scan Roland FJ-40 Specifications
(28 pages)
(28 pages)
Print & Scan Roland CJ-540 User Manual
(120 pages)
(120 pages)
Print & Scan Roland XC-540MT User Manual
(19 pages)
(19 pages)
Print & Scan Roland PC-12 User Manual
(49 pages)
(49 pages)
Print & Scan Roland VS-640i Setup Guide
(52 pages)
(52 pages)
Print & Scan Roland MPX-60 User Manual
(68 pages)
(68 pages)
Print & Scan Roland CX-300 User Manual
(102 pages)
(102 pages)
Print & Scan Roland VS-540 Setup Guide
(56 pages)
(56 pages)
Print & Scan Roland LEC-300A User Manual
(2 pages)
(2 pages)
Print & Scan Roland RA-640 Specifications
(50 pages)
(50 pages)
© 2020, manymanuals.com. All rights reserved. | 1.142 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals