Roland VersaCamm VP-540i Specifications Page 33

  • Download
  • Add to my manuals
  • Print
  • Page
    / 136
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 32
32
Chapter 2 Operation
2-2 Loading and Cutting Off Media
Loading Media
Media may be of one of two types: media wound onto a paper tube (called roll media) and media not rolled in this
way (called sheet media). This section explains how to load media, using roll media as an example. For information
on how to load sheet media, refer to the page indicated below.
P. 82 "How to Load Sheet Media"
CAUTION
Load roll media correctly.
Otherwise the media may fall and cause injury.
CAUTION
Roll media weighs about 30 kg (66 lb.). To avoid injury, handle with care.
CAUTION
Never load media that weighs more than 30 kg (66 lb.) (or, for the 30-inch model,
more than 20 kg (44 lb.)).
The machine may fail to withstand the weight and tip over or cause the media to fall.
1.
Pass the media through the machine and position it correctly on the left and right.
Open the front cover.
Move the media clamps to the sides.
Attach the media flanges to the roll media.
If the inner diameter of the roll-media core measures 3 inches, fit the media flanges onto the core, then turn each
knob clockwise all the way to keep the media flanges from falling out.
Media clamps
2 inches 3 inches
Press in to fit
on securely.
Match to the inner
diameter of the
roll-media core.
Roll-media
Knob
Turn until the knob
stops rotating.
Page view 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 135 136

Comments to this Manuals

No comments