Roland SC-7 User Manual Page 119
- Page / 135
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
117
Chapter 7: What to Do If...
What to Do If the Print-head Carriage Does Not Operate
During operation, if for some reason the print-head carriage does not return to the standby position, then following the
procedure, cap the print heads, and contact your authorized Roland DG Corp. dealer or service center.
If the print-head carriage is allowed to stand for a prolonged period with the print heads uncapped (that is with the print-
head carriage over the platen), the heads may become clogged or even damaged.
Capping the Print heads
1
Make sure the main power is switched off, then
open the cover on the right side of the machine.
2
Open the front cover and move the print-head
carriage to the standby position by hand.
3
Insert the oval end of the pipe included with the
machine into the hole in the bottom of the ma-
chine, then rotate the pipe.
The cap unit rises.
4
Align the guides at the two ends of the cap unit
with the guides at the two ends of the print-
head carriage.
Turn the pipe more bring the cap unit close to
the print-head carriage.
Standby position
Pipe
Print-head carriage
Cap unit
7-1 What to Do If...
Guides
Guides
Downloaded From ManualsPrinter.com Manuals
- User’s Manual 1
- For the USA 2
- For Canada 2
- Contents 3
- Features of the SC-545EX 6
- To Ensure Safe Use 10
- À propos des symboles 11
- Avis sur les avertissements 11
- Chapter 1: 17
- Getting Started 17
- 1-1 Checking Accessories 18
- 1-2 Part Names 19
- Inside the Front Cover 20
- Operation Panel (1) 20
- Operation Panel (2) 21
- Installation Environment 22
- Step 1: Assemble the Stand 23
- Chapter 1: Getting Started 24
- 1-4 Connecting the Cables 29
- Connecting to the Computer 30
- Securing the Cable 31
- BK CY MG LC LM YE 32
- Filling Ink 33
- ENV. MATCH 34
- REPLACE KNIFE 35
- FINISHED ? 35
- 1-6 Installing the Blade 36
- Chapter 2: 39
- Basic Operation 39
- Switching On the Power 41
- Chapter 2: Basic Operation 42
- 2-3 Loading Media 43
- PINCHROLL ERROR 46
- INVALID LEFT POS 46
- SETUP SHEET 46
- ROLL 46
- PIECE 47
- Adjusting the Head Height 48
- Separating the Media 50
- Removing the Media 50
- 2-4 Printing 51
- 2-5 Cutting 53
- Test Cutting 54
- 2-6 Printing and Cutting 56
- Printing Area 57
- AUTO ALIGN 58
- BASE - ALIGN 58
- Aligning Manually 60
- Chapter 3: 61
- Using the Print Heater 61
- Switching On the Print Heater 62
- 3-2 Loading Media 63
- 3-3 Printing and Cutting 64
- Cutting/Printing and Cutting 65
- Chapter 4: 67
- A Wide Variety of 67
- Operations 67
- Replacing an Ink Cartridge 69
- 1＿ 2■ 3■ 4 ■ 5■ 6■ 70
- INK REMAINING 71
- Setting the Start Location 72
- To release the setting 73
- 4-4 Setting the Margins 74
- PRINTING ADJ 75
- TEST PRINT 75
- Bidirectional Correction 76
- Saving an Adjustment Value 77
- ADJUST BI-DIR 78
- PRESETTING 1 78
- NOW PROCESSING 79
- PRINT-CUT ADJ 79
- COMPLETED 79
- PRINT - CUT ADJ 80
- PRINT - CUT ADJ 81
- FEED SETTING 81
- To resume printing 82
- Stopping Printing or Cutting 82
- SET LENGTH 83
- 0.0 m 20.0 m 83
- PRESS THE POWER 84
- KEY TO CLEAN 84
- Chapter 5: 85
- Maintenance 85
- 5-1 Cleaning the Print heads 86
- HEAD CLEANING 87
- FINISHED 88
- CLEANING? 88
- NOW PROCESSING. 90
- 5-3 Replacing the Wiper 91
- 5-4 Other Cleaning Tasks 92
- 5-8 When Moving the Unit 96
- Chapter 6: 99
- Menus and Keys 99
- 6-1 Menus Flowchart 100
- 6-2 Description of Menus 106
- 6-3 Description of Keys 110
- Chapter 7: 113
- What to Do If 113
- W 1234 mm 114
- Top menu 114
- 7-1 What to Do If 115
- Media Wrinkles or Warps 117
- The Media Becomes Jammed 118
- Capping the Print heads 119
- SET SOL CRT 121
- Chapter 7: What to Do If 122
- Messages 122
- Chapter 8: 125
- Specifications 125
- 8-1 Media Conditions 126
- Acceptable Media Width 127
- Chapter 8: Specifications 129
- 8-4 About Blade Life 130
- 8-6 Specifications 132
- Use in an operating environ 133
- R2-041129 135
Related products and manuals for Recording Equipment Roland SC-7
Recording Equipment Roland R-8 mkII User Manual
(159 pages)
(159 pages)
Recording Equipment Roland S-760 User Manual
(19 pages)
(19 pages)
Recording Equipment Roland VS-840EX User Manual
(211 pages)
(211 pages)
Recording Equipment Roland CD-2u User Manual
(140 pages)
(140 pages)
Recording Equipment Roland XP-50 User Manual
(37 pages)
(37 pages)
Recording Equipment Roland BR-1200CD User Manual
(364 pages)
(364 pages)
Recording Equipment Roland D-110 User Manual
(299 pages)
(299 pages)
Recording Equipment Roland ME-8B User Manual
(25 pages)
(25 pages)
Recording Equipment Roland XP-50 User Manual
(181 pages)
(181 pages)
Recording Equipment Roland VC-1 D-50 User Manual
(154 pages)
(154 pages)
Recording Equipment Roland BR-8 User Manual
(127 pages)
(127 pages)
Recording Equipment Roland MC-4 Owner's Manual
(180 pages)
(180 pages)
(26 pages)
Recording Equipment Roland VP-70 User Manual
(84 pages)
(84 pages)
© 2020, manymanuals.com. All rights reserved. | 0.188 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals