Roland XP-60 Owner's Manual download pdf (Page 115)

115

Chapter 4

Chapter 4. Memory Settings (Utility/Card Mode)

The Utility mode allows you to store Patch/Performance/

Rhythm Set settings (Write), and transmit data (Data

Transfer), as well as other global XP-30 memory settings.

About Utility/Card Mode

The XP-30 goes into Utility/Card mode if you press [UTIL/

CARD]. The indicator will blink.

Utility/Card mode offers nine functions categorized into two

groups—UTIL 1 and UTIL 2.

UTIL 1 (Utility 1)

fig.3-20

WRITE

This function writes Patch, Performance or Rhythm Set

settings you’ve modified into user memory (p. 116).

COPY

This function copies data from a Patch, Performance or

Rhythm Set into the current Patch, Performance or Rhythm

Set (p. 117).

INIT (Initialize)

This resets parameters of the current Patch, Performance or

Rhythm Set to default factory settings (p. 119).

XFER (Data Transfer)

This function transmits Patch, Performance, Rhythm Set or

System settings to an external MIDI device (p. 119).

PROTECT (User Memory Protect)

This function prevents user memory from being accidentally

rewritten (p. 121).

UTIL 2 (Utility 2)

fig.4-01

CARD

Here you can make settings related to memory cards (p. 121).

LOAD

This function loads data from memory card into the XP-30’s

memory (p. 122).

SAVE

This function saves data to memory card (p. 122).

FACTORY RESET

This function resets all the settings stored in the XP-30 to the

factory default settings (p. 123).

Basic Procedure in Utility/

Card Mode

* In order to use a memory card, you must first turn off the

power, and then insert a memory card into the card slot.

fig.4-02

1. Press [UTIL/CARD] so its indicator blinks.

The XP-30 will switch to Utility/Card mode.

fig.3-20

* The type of data that will be written, copied and initialize

depends on the mode you are in when you press [UTIL/CARD].

2. Press [ ] or [ ] to select the group (UTIL 1, UTIL 2)

containing the function you want.

3. Use [ ] or [ ] to select the desired function (the

function name will blink), and press [ENTER].

The display of the function you’ve selected will appear.

* You can also access the desired function display by using the

numeric keys or function buttons to specify the number of the

function.

* If you selected the UTIL 2 group function “1: CARD,” the

CARD display will appear. Here you can once again select the

desired function.

4. Set parameters as necessary on each function’s display.

* To cancel the operation, press [EXIT].

5. Press [ENTER] to execute the function.

When the operation is completed, the display will briefly

indicate “COMPLETED.”

6. To return to the UTIL 1 or UTIL 2 displays, press [EXIT].

To return to the display of the previous mode, press

[UTIL/CARD] to make the indicator go dark.

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 215 216

Comments to this Manuals

No comments

Roland XP-60 Owner's Manual Page 115

Comments to this Manuals

Related products and manuals for Digital pianos Roland XP-60