Roland XP-60 Owner's Manual download pdf (Page 54)

Chapter 2. Playing

■ Assigning a Different Patch to a

Part

The Patch assigned to each Part can be stored as a

Performance parameter.

1. Make sure that the PERFORM PLAY display is showing.

2. Press [ ] or [ ] to choose the Part to which you want

to assign a different Patch.

3. While holding down [PERFORM], press [PATCH] to call

up the PLAY display (PART PLAY) of the Patch assigned

to a specific Part.

fig.2-13

The upper right of the display will indicate the number of the

currently selected part (the current part).

4. Use the same procedure as in Patch mode to select a

Patch (p. 47).

* This setting is linked with the Group parameter and Number

parameter (PERFORM/PART/PATCH).

5. Press [PERFORM] or [EXIT] to return to the PERFORM

PLAY display.

■ Using the Sliders to Modify the

Sound in Realtime

(Sound Palette Function)

Using the Sound Palette function, you can modify sound

characters of the Patch assigned to a Part or adjust the

volume level of each Part.

* Sound variations or volume changes made with the Sound

Palette function affect only the performance. They have no effect

on the currently selected Performance, so the Sound Palette

settings cannot be saved. If you change the Performance, these

settings will be lost.

* The sound character and volume changes created using the

Sound Palette will also be transmitted to the external MIDI

devices.

Changing Sound Characters

* If Single Performance is selected, the effect applies only to the

current Part. With Layer Performance selected, this affects only

the Parts with Local parameter (PERFORM/MIDI/MIDI) set

ON.

1. Make sure that the PERFORM PLAY display is showing.

2. Press [FILTER/ENV] to light its indicator.

3. Move the sliders while you play the XP-30’s keyboard to

vary the sound.

To change brightness, move the CUTOFF slider.

To change resonance, move the RESO slider.

To change attack time, move the ATTACK slider.

To change decay time, move the DECAY slider.

Changing the Level (Volume) of Each Part

1. Make sure that the PERFORM PLAY display is showing.

2. Press [LEVEL] to light its indicator.

3. Press [ ] or [ ] to select the Part whose level (volume)

you want to change.

If you’ve selected any of Parts 1–4, sliders 1, 2, 3, and 4 adjust

Parts 1, 2, 3, and 4, respectively.

If you’ve selected any of Parts 5–8, sliders 1, 2, 3, and 4 adjust

Parts 5, 6, 7, and 8, respectively.

If you’ve selected any of Parts 9–12, sliders 1, 2, 3, and 4

adjust Parts 9, 10, 11, and 12, respectively.

If you’ve selected any of Parts 13–16, sliders 1, 2, 3, and 4

adjust Parts 13, 14, 15, and 16, respectively.

4. Move the slider as you play to adjust the level (volume)

of each Part as desired.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 215 216

Comments to this Manuals

No comments

Roland XP-60 Owner's Manual Page 54

Comments to this Manuals

Related products and manuals for Digital pianos Roland XP-60