Roland XP-60 Owner's Manual download pdf (Page 121)

121

Chapter 4. Memory Settings (Utility/Card Mode)

Chapter 4

Block (Source Block)

Specify the source of the data to be transmitted.

USER: Data from user memory will be transmitted.

PR-A–C, E: Preset A/B/C/E data will be transmitted.

GM: GM data will be transmitted.

XP-A–E: Data from an Wave Expansion Board will be

transmitted.

* XP-D, E can be selected only if the corresponding Wave

Expansion Board is installed.

CARD: Performance/Patch/Rhythm Set/System data

stored on memory card will be transmitted.

fig.4-29.e

Destination

Set the transmission destination to USER.

* If the Type parameter has been set to PERFORM, PATCH, or

RHYTHM, specify the first number of the transmission

destination.

Preventing User Memory

Writing Operation (PROTECT)

This function prevents user memory from being rewritten to

ensure Patch, Performance or Rhythm Set data will not

accidentally be lost.

fig.4-30

Internal (Internal Write Protect)

The Internal write Protect setting prevents the Write

operation from rewriting user memory. When this setting is

ON, the data cannot be rewritten. When this is OFF, the data

can be rewritten. When the XP-30’s power is turned on, this

setting is always turned ON, so you will need to turn it OFF

before rewriting user memory settings. It is also possible to

turn this setting OFF as part of the Write procedure.

Exclusive (Exclusive Protect)

The Exclusive Protect setting prevents System Exclusive

messages received from an external MIDI device from

rewriting user memory settings. When this setting is ON, the

data cannot be rewritten. When this is OFF, the data can be

rewritten by an incoming exclusive message, even if the

Internal Write Protect setting is ON.

Memory Card-Related

Settings (CARD)

XP-30 can use an optional memory card (S2M-5 (2MByte) or

S4M-5 (4MByte)).

Use this card when you wish to save data for which there is

no more space in the internal USER group, or so that the data

you created can be used on another XP-30.

Memory card must be formatted before they can be used.

* When you select “1: CARD” in the UTIL 2 group, the following

CARD display will appear. Select the function you wish to

execute.

fig.4-31

Before Using a Memory Card

* The power of the XP-30 must be turned off before inserting or

removing a memory card. If a memory card is inserted when the

power is turned on, the data in the memory card may be

destroyed, or the memory card may become unusable.

* Be sure to insert the memory card all the way into the slot.

* Do not touch the contacts of the memory card, or allow them to

become soiled.

* Never remove the memory card or turn off the power while an

operation (formatting, or data read/write) is being performed on

the memory card. Doing so will destroy the data in the memory

card and/or render the memory card unusable.

* If you affix the write protect label to the write protect area of the

memory card, it will be impossible to format the card or write

data to it. If you wish to format the card or write data to it, do so

without the label affixed. For details on the write protect label,

refer to the instruction included with your memory card.

If you attempt to format the card or write data to it when the

write protect label is affixed, the following message will

appear.

fig.4-32

File nameFile number

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 215 216

Roland XP-60 Owner's Manual Page 121

Comments to this Manuals

Roland XP-60 Owner's Manual Page 121

Comments to this Manuals

Related products and manuals for Digital pianos Roland XP-60