Roland SYS-553 Owner's Manual Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 84
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
16
Panel Descriptions
P-10_RearPanel.eps
MIDI OUT/THRU Connector
Connect a MIDI device that you want to control from the P-10.
MIDI IN Connector
Connect a MIDI device that you want to use to control the
P-10.
SD Card Cover Attachment Screws
Use the screws to attach the SD card theft prevention
cover.
INPUT Jacks
(AUDIO L/R, VIDEO, S-VIDEO)
Connect an external device to display its images on the
P-10’s display or capture images using the P-10.
Security Lock ( )
Attach a security wire here to prevent theft of the P-10.
http://www.kensington.com/
OUTPUT Jacks
(AUDIO L/R, VIDEO, S-VIDEO)
Connect an external device for displaying images, such
as a display or projector.
[INPUT LEVEL] Knob
Adjusts the audio level of the INPUT jacks. You can check
the audio level with the “Level Meter” (p. 59).
USB Connector
Connect the P-10 to a computer and transfer files back
and forth.
Cord Hook
To prevent inadvertent disruption of power to your unit
(should the plug be pulled out accidentally), and to avoid
applying undue stress to the DC IN jack, anchor the
power cord using the cord hook (p. 17).
MEMORY CARD (SD Card) Slot
Insert an SD card here (p. 17).
DC IN Jack
Connect the supplied AC adaptor here (p. 17).
POWER Switch
Press this switch to turn the power on and off (p. 19).
Ground Terminal
Depending on the circumstances of a particular setup, you
may experience a discomforting sensation, or perceive
that the surface feels gritty to the touch when you touch
this device, microphones connected to it, or the metal
portions of other objects, such as guitars. This is due to an
infinitesimal electrical charge, which is absolutely
harmless. However, if you are concerned about this,
connect the ground terminal (see figure) with an external
ground. When the unit is grounded, a slight hum may
occur, depending on the particulars of your installation. If
you are unsure of the connection method, contact your
nearest Roland Service Center or an authorized Roland
distributor, as listed on the “Information” page.
Unsuitable places for connection:
Water pipes (may result in shock or electrocution)
Gas pipes (may result in fire or explosion)
Telephone-line ground or lightning rod (may be
dangerous in the event of lightning)
Rear Panel
P-10_e.book 16 ページ 2008年7月16日 水曜日 午後8時23分
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 83 84

Comments to this Manuals

No comments