Roland SYS-553 Owner's Manual download pdf (Page 46)

Changing the Pad Parameters

You can exchange still images that are assigned to a pad.

You cannot add still images to a pad that already

has a movie assigned to it. If you want to do this,

first delete the pad data, and then assign a still

image.

For details, see “Deleting Captured Images” (p. 36).

1. Select the pad to which the still image that you want

to exchange is assigned.

Pads that have still images assigned to them light up blue.

2. Press the [PAD PARAM] button.

3. Rotate the [VALUE] knob to select “Still Image File,”

and then press the [ENTER] button.

4. Rotate the [VALUE] knob to select the image that

you want to exchange, and then press the [ENTER]

button.

The FILE SELECT screen appears.

D05_01.eps

5. Rotate the [VALUE] knob to select the image that

you want to exchange with the previous image, and

then press the [ENTER] button.

A confirmation screen appears.

6. Rotate the [VALUE] knob to select “Exchange,” and

then press the [ENTER] button.

The new image is assigned to the pad, replacing the old

image.

You can add an audio file to a pad which has still images

assigned to it. When you play back the still images, the audio

file also plays back.

To specify an audio file, make sure you add audio

files to the SD card beforehand.

1. Rotate the [VALUE] knob to select “Additional Audio

File” on the PAD PARAMETER screen, and then press

the [ENTER] button.

2. Rotate the [VALUE] knob to select an audio file.

3. Press the [ENTER] button.

If there are no audio files saved to the SD card, you

cannot select an audio file.

Specify the volume.

When you press a pad to play back still images, they play

back with strobe or as a slide show. When you play back still

images with the slide show effect, each image is displayed in

order. If you apply the strobe effect, the images appear at an

interval you specify.

Exchanging Still Images Assigned to a

Pad

Specifying an Audio File

(Additional Audio File)

Specifying the Volume (Audio Level)

Setting

Description

MAX

This is the maximum volume.

1–9

Specify the volume level with a number.

The higher the number you set, the higher the

volume becomes.

OFF

The volume is set to “0.”

Specifying Effects (Effect Sw)

Setting

Description

OFF

Turns off all effects.

Slide Show

Applies the slide show effect.

Strobe

Applies the strobe effect.

P-10_e.book 46 ページ２００８年７月１６日　水曜日　午後８時２３分

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 83 84

Comments to this Manuals

No comments

Roland SYS-553 Owner's Manual Page 46

Comments to this Manuals

Related products and manuals for Sequencer Roland SYS-553