Roland SYS-553 Owner's Manual download pdf (Page 35)

Capturing Images from an External Device

You can capture up to about 30 minutes of

continuous video on the P-10. Even when using a

2GB SD card, capturing automatically stops when

the capture time exceeds 30 minutes.

Furthermore, capturing automatically stops when the

amount of empty space on the card is insufficient.

Connect the P-10 to an external device beforehand.

1. Play back an image on the external device.

2. Press the [EXT SOURCE] button.

Button_EXTSource.eps

The image from the external device appears on the P-10’s

display.

3. Press the CAPTURE [STILL] button when the image

you want to capture appears.

Button_Still.eps

Empty pads flash blue.

When there is no flashing pad, press a bank button

to select another bank.

4. Press a pad that is flashing.

The captured still image is assigned to the selected pad.

If you have selected a pad that is lit red (movie) or blue

(still image), the following screen appears.

D04_01.eps

If you want to overwrite the image assigned to the pad,

rotate the [VALUE] knob to select “Execute,” and then

press the [ENTER] button.

If you don’t want to overwrite the image assigned to the

pad, rotate the [VALUE] knob to select “Cancel,” and then

press the [ENTER] button.

You can capture a continuous series of still images.

For details, see “Specifying the Capture Still Mode

(Capture Still Mode)” (p. 58).

Capturing Still Images

P-10_e.book 35 ページ２００８年７月１６日　水曜日　午後８時２３分

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 83 84

No comments

Roland SYS-553 Owner's Manual Page 35