Roland SYS-553 Owner's Manual download pdf (Page 19)

Before You Start

Once the connections have been completed (p. 17),

turn on the power to your various devices in the

order specified. By turning on devices in the wrong

order, you risk causing malfunction and/or damage

to speakers and other devices.

1. Turn down the volume on the P-10 and any

connected devices.

2. Press the POWER switch on the P-10.

Button_POWER.eps

When the power is turned on, the BANK [A] button lights

up. Pads that have images assigned to them also light up.

The P-10’s screen may flicker when the power is

turned on.

3. Turn on any connected devices.

4. Adjust the volume to an appropriate level on the

P-10 and any connected devices.

This unit is equipped with a protection circuit. A

brief interval (a few seconds) after power up is

required before the unit will operate normally.

1. Turn down the volume on the P-10 and any

connected devices.

2. Turn off the power to any connected devices.

3. Press the POWER switch on the P-10.

All of the buttons and indicators on the top panel turn off.

Use the P-10 at presentations to accurately convey your ideas

with movies and still images.

P-10_Presentation.eps

Perform at an event with images that have impact by using

effects such as color and speed changes.

P-10_Event.eps

Turning the Power On and Off

Turning the Power On

Turning the Power Off

Main Applications

Using the P-10 for Presentations

Using the P-10 at Events

P-10_e.book 19 ページ２００８年７月１６日　水曜日　午後８時２３分

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 83 84

No comments

Roland SYS-553 Owner's Manual Page 19