Roland SYS-553 Owner's Manual Page 60

  • Download
  • Add to my manuals
  • Print
  • Page
    / 84
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 59
60
Menu
Specify the device ID when you have connected multiple P-10’s
to a MIDI device so that you can tell them apart.
Specify the channel for receiving MIDI messages.
Specify the channel for transmitting MIDI messages.
When this setting is turned on, MIDI messages received from
the MIDI IN jack are transmitted through the P-10 without any
changes.
Specify the key range for controlling the P-10 using a MIDI
device.
You cannot specify upper and lower keys that
overlap when specifying the Keyboard Range.
Specifying the Device ID (Device ID)
Setting
17–32
Specifying the Reception Channel
(Rx Channel)
Setting
Description
OFF
The P-10 doesn’t receive MIDI messages.
1–16
Specify the channel for receiving MIDI
messages.
Specifying the Transmission Channel
(Tx Channel)
Setting
Description
OFF
The P-10 doesn’t transmit MIDI messages.
1–16
Specify the channel for transmitting MIDI
messages.
Specifying Soft Through (Soft Through)
Setting Description
ON
Transmit MIDI data received from the
MIDI IN jack as is from the MIDI OUT/
THRU jack.
OFF
MIDI data received from the MIDI IN jack
is not transmitted.
Operating the P-10 Using Note
Messages (Note Message Enable)
Setting
Description
Note
Message
Enable
OFF
Control from the MIDI keyboard is
disabled.
49keys
Select this setting to use 49 keys of
a MIDI keyboard.
The keyboard range is as follows.
White Keys: C2 (36)–G3 (55)
<PADs 1–12>,
A3 (57)
<EXT SOURCE>
Black Keys: C#2 (37)–C#3 (49)
<BANK A–F>
You can change pads using the
white keys and change banks using
the black keys.
You can change the bank number
when you press a white key while
holding a black key.
Assignable
You can change the pad and bank
by using the keyboard range
specified in “Keyboard Range
Lower” and “Keyboard Range
Upper.” The bank number
corresponds only to the selected
number.
Keyboard Range Lower
When “Assignable” is specified,
you can specify the lowest note of
the keyboard range.
Keyboard Range Upper
When “Assignable” is specified,
you can specify the highest note of
the keyboard range.
P-10_e.book 60 ページ 2008年7月16日 水曜日 午後8時23分
Page view 59
1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 83 84

Comments to this Manuals

No comments