Roland VK-7 Owner's Manual download pdf (Page 36)

Playing the Organ

■

Adjusting the Sensitivity of the D Beam

Controller

The VK-8 automatically calibrates the sensitivity of the D Beam controller each time

power is turned on. You can also adjust the sensitivity of the D Beam controller after

the power is turned on.

Caution

The VK-8 automatically calibrates the sensitivity of the D Beam controller each time

power is turned on. For this reason, when turning on the power, make sure no object

is placed on the D Beam, and avoid having your hands near it.

Also, please be aware that the D Beam will not function in a location where there is

a large amount of infrared light.

Automatically adjusting the sensitivity of the D Beam controller

While holding down the D BEAM [ON] button, press the VIBRATO

AND CHORUS [ON] button.

The sensitivity of the D Beam controller will be adjusted automatically.

The D Beam indicators will show the D Beam sensitivity.

Manually adjusting the sensitivity of the D Beam controller

While holding down the D BEAM [ON] button, turn the [VIBRATO

AND CHORUS] knob to adjust the sensitivity of the D Beam controller.

Since the sensitivity of the D

Beam controller is adjusted

automatically when the power

is turned on, the sensitivity of

the D Beam controller is not

stored internally.

Min Max

VK-8_e.book 36 ページ２００５年７月２５日　月曜日　午後４時２４分

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 83 84

No comments

Roland VK-7 Owner's Manual Page 36