Roland VK-7 Owner's Manual Page 71
- Page / 84
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
71
MIDI Implementation
Model: VK-8 (Combo Organ)
Date: Dec. 1, 2001
Version: 1.00
1. Receive data
* The VK-8 has two MIDI IN connectors: KEYBOARD IN and PEDAL IN. If the SUB
KEYBOARD FUNCTION (p. 58) is ON, messages input to KEYBOARD IN will be
received as messages for the Lower part, regardless of their channel number. Messages
input to PEDAL IN will be received as messages for the Pedal part, regardless of their
channel number (Omni On).
*When the SUB KEYBOARD FUNCTION (p. 58) is OFF, MIDI messages will control each
part according to their MIDI channel number (Omni Off). At the factory settings, each
part is set to the following transmit/receive channels.
-----------------------
CONTROL | 1ch
UPPER ORGAN | 1ch
LOWER ORGAN | 3ch
PEDAL ORGAN | 2ch
OTHER TONES | 4ch
DRUMS | 10ch
SPRING SHOCK | 9ch
-----------------------
■
Channel Voice Messages
●
Note off
Status
2nd byte 3rd byte
8nH kkH vvH
9nH kkH 00H
n = MIDI channel number : 0H - FH (ch.1 - ch.16)
kk = note number : 00H - 7FH (0 - 127)
vv = note off velocity : 00H - 7FH (0 - 127)
*When the SUB KEYBOARD FUNCTION (p. 58) is ON, the input to the KEYBOARD IN
will be handled as messages for the LOWER PART, and the input to PEDAL IN will be
handled as messages for the PEDAL PART.
●
Note on
Status
2nd byte 3rd byte
9nH kkH vvH
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
kk = note number : 00H - 7FH (0 - 127)
vv = note on velocity : 00H - 7FH (0 - 127)
*When the SUB KEYBOARD FUNCTION (p. 58) is ON, the input to the KEYBOARD IN
will be handled as messages for the LOWER PART, and the input to PEDAL IN will be
handled as messages for the PEDAL PART.
●
Control Change
❍
Modulation (Controller number 1)
Status
2nd byte 3rd byte
BnH 01H vvH
n = MIDI channel number : 0H - FH (ch.1 - ch.16)
vv = modulation depth : 00H - 7FH (0 - 127)
* Received only for the Other Tones Part.
❍
Data Entry (Controller Number 6, 38)
Status
2nd byte 3rd byte
BnH 06H mmH
BnH 26H llH
n = MIDI channel number : 0H - FH (ch.1 - ch.16)
mm,ll = the value of the parameter specified by RPN/NRPN
mm = upper byte (MSB), ll = lower byte (LSB)
❍
Volume (Controller number 7)
Status 2nd byte 3rd byte
BnH 07H vvH
n = MIDI channel number : 0H - FH (ch.1 - ch.16)
vv = volume : 00H - 7FH (0 - 127)
* Received only for the Other Tones Part.
❍
Panpot (Controller number 10)
Status
2nd byte 3rd byte
BnH 0AH vvH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
vv = panpot: 00H-40H-7FH (Left-Center-Right)
* Received only for the Other Tones Part.
❍
Expression (Controller number 11)
Status
2nd byte 3rd byte
BnH 0BH vvH
n = MIDI channel number : 0H - FH (ch.1 - ch.16)
vv = expression : 00H - 7FH (0 - 127)
* If you want to control all of the Organ Parts, transmit data on the channel specified by
the CONTROL MIDI CH. setting (factory setting: channel 1). It is not possible to
separately control each part of the Organ Part.
*When the SUB KEYBOARD FUNCTION (p. 58) is ON, this has the same function as an
expression pedal connected to the VK-8’s EXPRESSION PEDAL jack.
❍
General Purpose Controller 1 (Controller number 16) (Other tones
glide)
Status
2nd byte 3rd byte
BnH 10H vvH
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
vv = control value : 00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON
* Received only for the Other Tones Part.
* Not received when MIDI GENERAL CONTROLLERS SWITCH (p. 53) is OFF.
❍
General Purpose Controller 2 (Controller number 17) (Wheel Brake)
Status
2nd byte 3rd byte
BnH 11H vvH
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
vv = control value : 00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON
*When SUB KEYBOARD FUNCTION (p. 58) is OFF, this is received on the channel
specified for CONTROL MIDI CH. (p. 54) (factory setting: channel 1).
* Not received by the Other Tones part.
* Not received when MIDI GENERAL CONTROLLERS SWITCH (p. 53) is OFF.
❍
Hold 1 (Controller number 64)
Status 2nd byte 3rd byte
BnH 40H vvH
n = MIDI channel number : 0H - FH (ch.1 - ch.16)
vv = control value : 00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON
*When the SUB KEYBOARD FUNCTION (p. 58) is ON, this has same function as a hold
pedal connected to the VK-8’s HOLD PEDAL jack.
❍
Sound Controller 1-9 (Controller number 70-78) (Harmonic Bars)
Status
2nd byte 3rd byte
BnH ccH vvH
n = MIDI channel number : 0H - FH (ch.1 - ch.16)
cc = control change number : 46H - 4EH (70-78)
vv = control value : 00H - 7FH (0 - 127)
* Receives harmonic bar values.
* Not received by the Other Tones part.
*When the SUB KEYBOARD FUNCTION (p. 58) is ON, the input to the KEYBOARD IN
will be handled as messages for the LOWER PART, and the input to PEDAL IN will be
handled as messages for the PEDAL PART.
* Not received when MIDI SOUND CONTROLLERS SWITCH (p. 53) is OFF.
cc |H.Bar Feet
----------+-------------------------------------
46H |16’
47H |5 1/3’
48H |8’
49H |4’
4AH |2 1/3’
4BH |2’
4CH |1 3/5’
4DH |1 1/3’
4EH |1’
* Control values and harmonic bars are related as follows.
vv |H.Bar Level
-------------+---------------------------------
00H - 0EH |0
0FH - 1CH |1
1DH - 2AH |2
2BH - 38H |3
39H - 47H |4
48H - 55H |5
56H - 63H |6
64H - 71H |7
72H - 7FH |8
❍
General Purpose Controller 5 (Controller number 80) (Rotary Speed)
Status
2nd byte 3rd byte
BnH 50H vvH
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
vv = control value: 00H - 7FH (0 - 127)
*When SUB KEYBOARD FUNCTION is OFF (p. 58), this is received on the channel
specified for CONTROL MIDI CH. (p. 54) (factory setting: channel 1).
* Not received when MIDI GENERAL CONTROLLERS SWITCH (p. 53) is OFF.
VK-8_e.book 71 ページ ２００５年７月２５日 月曜日 午後４時２４分
- Owner’s Manual 1
- SAVE THESE INSTRUCTIONS 2
- IMPORTANT SAFETY INSTRUCTIONS 2
- USING THE UNIT SAFELY 3
- IMPORTANT NOTES 5
- Contents 6
- Main Features 9
- Panel Descriptions 10
- 34 3635 38 40 41 4237 39 43 12
- How the VK-8 Works 13
- About the Memories 15
- Before You Begin Playing 16
- About a OUTPUT jacks 17
- Turning Off the Power 19
- Playing the Organ 22
- (Harmonic Bars) 24
- What Are “Feet?” 26
- (Percussion) 28
- Algorithm) 30
- (Rotary Sound) 32
- About the Effects 35
- Controller 36
- Changing the Split Point 38
- Playing Other Tones 43
- Saving Your Settings (Preset) 45
- Advanced Use 47
- 0Min Max 48
- Settings That Are Saved for 49
- Click Noise and Percussion 51
- Settings 51
- MIDI-related Settings 52
- Equalizer and Other Settings 55
- Parameters that are stored 56
- Playing the VK-8 from an 58
- External MIDI Device 58
- External Pedal Keyboard 59
- (PK-7 etc.) 59
- MIDI OUT 59
- Using an External Sequencer 60
- Saving VK-8 Settings on an 61
- External Sequencer (Bulk 61
- Connecting a Rotary 62
- Troubleshooting 63
- Error Indications 66
- Preset/OTHER TONES List 67
- OTHER TONES List 68
- Edit Parameters 69
- Drum List 70
- MIDI Implementation 71
- 2. Transmitted Data 73
- 4. Supplementary material 76
- MIDI Implementation Chart 77
- Main Specification 78
- 02896667 ’05-8-5N 84
Related products and manuals for Mixers Roland VK-7
Mixers Roland Vs-880 User Manual
(296 pages)
(296 pages)
Mixers Roland V-4 Owner's Manual
(100 pages)
(100 pages)
Mixers Roland Vs-880 Operations Instructions
(154 pages)
(154 pages)
Mixers Roland V-1600HD Owner's Manual
(68 pages)
(68 pages)
Mixers Roland CPM-300 User Manual
(26 pages)
(26 pages)
Mixers Roland SP-202 User Manual
(47 pages)
(47 pages)
Mixers Roland SRQ-4015 User Manual
(48 pages)
(48 pages)
Mixers Roland M-480 User Manual
(2 pages)
(2 pages)
Mixers Roland V-1600HD User Manual
(8 pages)
(8 pages)
Mixers Roland M-480 Owner's Manual
(17 pages)
(17 pages)
Mixers Roland M-1000 User Manual
(26 pages)
(26 pages)
Mixers Roland V-4EX Owner's Manual
(64 pages)
(64 pages)
Mixers Roland V-4 User Manual
(4 pages)
(4 pages)
Mixers Roland SRQ-4015 User Manual
(1 pages)
(1 pages)
Mixers Roland SRQ-4015 User Manual
(8 pages)
(8 pages)
© 2020, manymanuals.com. All rights reserved. | 2.613 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals