Roland VK-7 Owner's Manual download pdf (Page 48)

Advanced Use

State of the D BEAM Indicators in Edit Mode

❍

When the setting is “0–127,” “0–10,” or “0–15,” “0–31.”

The minimum value (0) will be when the D Beam indicators are all dark, and the maximum value when they are

all lit. As you increase the value, the D Beam indicators will successively light from the bottom.

The setting will increase as you turn the [VIBRATO AND CHORUS] knob clockwise, and will decrease as you

turn it counterclockwise.

When you press the VIBRATO AND CHORUS [ON] button, this will return to the default setting.

❍

If the setting is an “ON or OFF” switch

This will be OFF (0) when all D Beam indicators are dark, and ON when they are all lit.

This will be ON when the [VIBRATO AND CHORUS] knob is turned to the right, and OFF when turned to the

left.

When you press the VIBRATO AND CHORUS [ON] button, this will return to the default setting.

❍

When the setting is “-5–0–+5,” “-6–0–+5,” “-100–0–+100,” or “-3–0–+3”

The lit location of the D Beam Type indicator shows the approximate value.

When the value is 0, the center D Beam Type indicator (RING MODULATOR indicator) will light.

D Beam Type indicators below the middle will indicate a negative value, and D Beam Type indicators above the

middle will indicate a positive value.

Turn the [VIBRATO AND CHORUS] knob clockwise to increase the value, or counterclockwise to decrease it.

When you press VIBRATO AND CHORUS [ON], this will return to the default setting.

Min Max

OFF ON

0Min Max

VK-8_e.book 48 ページ２００５年７月２５日　月曜日　午後４時２４分

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 83 84

No comments

Roland VK-7 Owner's Manual Page 48