Roland FP-2 Owner's Manual download pdf (Page 48)

Chapter 4 Other Functions

Switch to Function mode (p. 38), and press the

[Rec] button.

Hold down the [Rec] button, and press the [-] or

[+] button so “L.Ct” is displayed.

fig.04-15

Press the [-] or [+] button to switch Local Control

on and off.

Setting the MIDI Out Mode

By setting the MIDI Out Mode, you can select to have a more

suitable (to the external MIDI device) selection of MIDI data

be output from the MIDI Out connector when you make tone

changes on the FP-2.

Four settings for the MIDI Out Mode are available.

“MIDI Out Mode 1” is the power-up default setting.

Switch to Function mode (p. 38), and press the

[Rec] button.

Hold down the [Rec] button, and press the [-] or

[+] button so “OUt” is displayed.

fig.04-17

Press the [-] or [+] button to select the MIDI Out

Mode.

Transferring the Program Change

Message

When a setup is switched, a Program Change message is

transmitted.

Use a MIDI cable (optional) to connect the FP-2’s

MIDI OUT connector to the MIDI IN connector

on an external sequencer, or use a USB cable to

connect the computer.

Switch to Function mode, and press the [Sound

Control] button.

Hold down the [Sound Control] button, and press

the [-] or [+] button to select bank select MSB,

LSB or Program change (PC).

fig.disp—-

Press [-] or [+] button to select the number.

Exit Function mode to register the setup to the

settings (p. 33).

Using the Pedal to Switch Setup

(Pedal shift)

You can use the pedal which is connected to the

sostenuto(FC1) jack or the soft(FC2) jack as a dedicated

switch for selecting Setup in order.

Switch to Function mode (p. 38), and press the

[Sound Control] button.

Hold down the [Sound Control] button, and press

the [-] or [+] button so “SFt” is displayed.

Indication

Descriptions

MIDI Out Mode 1

This setting is suitable for the connection of

sequencers. The MIDI information (for exam-

ple: Bank select, Program Change, Settings of

Effects, and so on) is output from the MIDI

Out connector when you make a tone change

on the FP-2.

MIDI Out Mode 2

This setting is suited for connecting to a sound

module.

The MIDI information (for example:

Program change) is not output from the MIDI

Out connector when you make a tone change

on the FP-2.

MIDI Out Mode 3

You can transmit performance data recorded

with the FP-2.

Additionally, the MIDI messages that are out-

put have the same content as those in MIDI

Out Mode 1.

MIDI Out Mode 4

The MIDI messages that are output have the

same content as those in MIDI Out Mode 3.

However, these are not transmit to FP-2’s

sound module.

Additionally, the local control is switched to

off (p. 47).

Press

While holdin

down...

Press

While holding

down...

Press

While holding

down...

FP-2_e.book 48 ページ２００４年１１月２６日　金曜日　午後４時２５分

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 75 76

Comments to this Manuals

No comments

Roland FP-2 Owner's Manual Page 48

Comments to this Manuals

Related products and manuals for Musical Instruments Roland FP-2