Roland FP-2 Owner's Manual download pdf (Page 49)

Chapter 4 Other Functions

fig.disp—-

Press the [-] or [+] button to select pedal setting.

Transferring the FP-2’s Settings to an

External MIDI Device (Bulk Dump)

You can transfer the contents of FP-2’s Setup settings to an

external MIDI device. This operation is called “bulk dump.”

Use a MIDI cable (optional) to connect the FP-2’s

MIDI OUT connector to the MIDI IN connector

on an external sequencer, or use a USB cable to

connect the computer.

Switch to Function mode (p. 38), and press the

[Sound Control] button.

Hold down the [Sound Control] button, and press

the [-] or [+] button to select bulk dump.

“dnP” is displayed, and the [Play/Stop] button’s

indicator begin flashes.

fig.disp—-

Put the external sequencer in record mode.

Press [Play/Stop] to transmit the settings.

After the transmitting is finished, “dnP” is appeared in

display.

Stop the external sequencer.

Using the V-LINK function

Connecting the FP-2 to a V-LINK compatible image device

allows you to control the images with the FP-2.

* To prevent malfunction and/or damage to speakers or other

devices, always turn down the volume, and turn off the power

on all devices before making any connections.

V-LINK

V-LINK ( ) is functionality promoted by Roland

that allows linked performance of music and visual material.

By using V-LINK-compatible video equipment, visual effects

can be easily liked to, and made part of the expressive

elements of a performance.

■

How to Use the V-LINK

Hold down the [Reverb] button and press the

[Split] button.

The display changes as shown below, and the FP-2

switches to Image Control mode.

fig

* The display does not change when chords are displayed.

You can control images using the twelve keys at the left

end of the keyboard.

fig

* While V-LINK is switched on, no sound is produced when you

press any of the twelve keys at the left end of the keyboard.

Hold down the [Reverb] button and press the

[Split] button once again to exit.

Indication Description

OFF

You can use a function assigned to the

sostenuto(FC1) pedal and the soft(FC2)

pedal.

FC1

The sostenuto(FC1) pedal is dedicated to

switching Setup. The function assigned to

the sostenuto(FC1) pedal cannot to be

used.

FC2

The soft(FC2) pedal is dedicated to

switching Setup. The function assigned to

the soft(FC2) pedal cannot to be used.

Press

While holding

down...

Flashes Flashes

A0~G#1

FP-2_e.book 49 ページ２００４年１１月２６日　金曜日　午後４時２５分

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 75 76

Comments to this Manuals

No comments

Roland FP-2 Owner's Manual Page 49

Comments to this Manuals

Related products and manuals for Musical Instruments Roland FP-2