Roland FP-2 Owner's Manual download pdf (Page 51)

Troubleshooting

Case Cause/What to do

No Power

Is the power cord properly connected?

(p. 8)

No Sound

Is the volume level of the FP-2 (p. 10) or

connected device turned all the way

down?

Are headphones plugged in?

Has a plug remained connected to the

Phones jack? (p. 10)

Is the Speaker switch to “ON”? (p. 7)

Is Local Off selected? When Local Control

is set to OFF, no sound is produced by

playing the keyboard. Set Local Control to

“ON”(p. 47).

Is the MIDI Out mode set to “4”? (p. 48)

No Sound (With a

MIDI Device

Connected)

Is the power to all devices turned on?

(p. 44)

Is the MIDI cable connected and plugged

in correctly? (p. 46)

Does the MIDI channel match the

connected instrument? (p. 47)

No Sound From

the Left Side

Is the [Chord Progression] button’s

indicator off? (p. 31)

No sound from the left side is produced if

the [Chord Progression] button’s indicator

is off while the Session Partner is playing.

Is V-LINK switched on (p. 49)? When V-

LINK is switched on, the twelve keys at the

left end of the keyboard are used to control

images, and no sounds are played with

these keys.

The Volume of the

Keyboard is Too

Low

Is the volume balance turned all the way

down? (p. 18)

Two Sounds are

Produced When

the Keyboard is

Played

Is the FP-2 in Dual Play? (p. 15)

When the FP-2 is connected to an external

sequencer, set it to the Local OFF mode

(p. 47). Alternatively, set SOFT THRU on

the sequencer to “OFF.”

Not All Sounds Are

Played

The FP-2 has a maximum polyphony of 64

voices. When playing together with a song

or Rhythm along with heavy use of the

damper pedal, the performance data may

exceed the number of available voices, and

as a result, some notes or sounds played on

the keyboard may not sound.

The

accompaniment

sounds when the

keys are played

Is the [Chord Progression] button’s

indicator off? (p. 31)

When the [Chord Progression] button’s

indicator is off, the Session Partner begins

if you ﬁnger a keyboard.

The Keyboard or

Song Register or

Pitch is Off

Have you set Transpose? (p. 24)

Are the settings for the Temperament

(p. 42) correct?

Is the setting for Master Tuning correct?

(p. 41)

Song Doesn’t Play

Back

Does “dEL” appear in the display? (p. 13)

The internal songs cannot be played back

while recorded performance data remains

in the FP-2’s memory. Try playing back the

song after deleting the performance data.

Only the Sound of

a Particular

Instrument in a

Song Does Not

Play

Is Track Mute on? (p. 13)

If the button’s light is out when you hold

down the [Play/Stop] button, the music on

that track is not heard. Press the track

button so the light is illuminated.

Cannot Record

Have you selected which of the Track

Buttons to be recorded? (p. 36)

Tempo of

Recorded Song or

Metronome is Off

When you select for recording an internal

song that features tempo changes, the

tempos of Performances recorded on other

tracks are altered along with these

changes. In addition, the Metronome

tempo is also changed the same way.

Recorded

Performance is

Erased

Performances that have been recorded are

erased when the power for the FP-2 is

turned off. Once erased, Performances

cannot be recovered.

The [Split] button’s

lindicator won’t go

out

Is the [Chord Progression] button’s

indicator off? (p. 31)

Effects Not

Applied

When the part to which the effects are

applied is assigned to the Lower Tone, the

effects are then not applied to the Upper

Tone (p. 41).

Reverb Remains

Even After Reverb

is Lifted

As the FP-2 piano sounds faithfully

reproduce the depth and reverberation of

actual acoustic pianos, reverberation may

still be audible even after the reverb effect

is removed from sounds.

Case Cause/What to do

FP-2_e.book 51 ページ２００４年１１月２６日　金曜日　午後４時２５分

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 75 76

Comments to this Manuals

No comments

Roland FP-2 Owner's Manual Page 51

Comments to this Manuals

Related products and manuals for Musical Instruments Roland FP-2