Roland SJ-600 User Manual download pdf (Page 51)

User's Reference

Printing at the Desired Location

This sets the location where printing starts.

Normally the origin point is set at the lower-right point of the printing area.

When [SHEET TYPE] is set to [OPAQUE], the width of

the printing area is set automatically (see "User's Refer-

ence -- About the Printing Area").

To determine the desired printing area, follow the steps in

"Setting the printing area in the left-right direction (the

direction of carriage movement)" to set the width of the

printing area. When [SHEET TYPE] is set to [CLEAR],

the printing area is not set automatically, so set the

printing area in the same way. If this setting is not made,

the printing area uses the maximum value for the machine.

Canceling setup cancels the printing area.

Original printing

area

New printing

area

Left-hand edge of the printing area Right-hand edge of the printing area

Setting the printing area in the left-right direction (the direction of carriage movement)

Printing area

Origin

* Returning the

start point in

the left-right

direction to its

original

location

Margin (value set for [PAGE MARGIN])

To change the start point for printing, use the [BASE

POINT] key. At this time, the printing area does not

change.

Follow the step in both "Specifying a location in the

lengthwise direction" and "Specifying a location in the

left-right direction (the direction of carriage movement)"

to set the start point.

Starting location in the

lengthwise direction

"Specifying a location in

the lengthwise direction"

Starting location in the left-right direction

"Specifying a location in the left-right direction (the

direction of carriage movement)"

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 76 77

Comments to this Manuals

No comments

Roland SJ-600 User Manual Page 51

Comments to this Manuals

Related products and manuals for Print & Scan Roland SJ-600