Roland HPD-15 User Manual download pdf (Page 36)

Chapter 2 Modifying a Patch

Adjusting Sounds

Select the sound that you wish to play by using the pads, D

Beam, or ribbons. You can also adjust the pitch or duration of

the sound.

* Some parameters have relation to the parameters in EZ Edit

mode. If there are problems (e.g., no sound), check the

parameters in EZ Edit mode.

Parameter Category: PAD INST

fig.2-07.e

(Inst) : Refer to Instrument List (p. 92)

Selects the sound (instrument.)

* You can jump to the first sound in each instrument group by

using the Skip function (p. 33).

Pad Level: 0–127

Adjusts the volume.

Pan: L63–Center–R63, Random, Alternate

Adjusts the pan (localization) of the output sound.

Random: The pan changes randomly each time the pad is struck.

Alternate: The pan alternates left and right each time the pad is

struck.

Reverb Send: 0–127

Adjusts the depth of the reverberation.

Pitch: -2400–+2400cent

Adjusts the pitch.

100 cents is a semitone.

* You can change the pitch in steps of 100 cent by using the Skip

function (p. 33).

Decay: -31–+31

Adjusts the duration (decay time.)

* Some sounds do not change the duration.

Color: -31–+31

Adjusts the tone.

Sweep: -31–+31

Changes the pitch.

Positive (+) values will cause the pitch to change from high

to low. Negative (-) values will cause the pitch to change

from low to high.

MULTI-FX/LFO: OFF, ON

Turns the multi-effects and LFO on or off.

TrigMode: Shot, Gate, Trig (Pad)

Move, MovGate, Touch, TchGate,

Scrape, Scrp1wy (D Beam, Ribbon)

Selects how the sound will be played.

• Pad

Shot * : When you strike the pad, the sound will

play for the duration specified for that

particular sound.

Gate * : The sound will play while you continue

pressing the pad. This is effective when

you have selected a sustaining sound.

Trig: The sound will play when you strike the

pad, and will stop when you strike the pad

once again. This is effective when you have

selected a sustaining sound.

• D Beam, Ribbon

Move: The sound will play when you place your

hand above (or touch with your finger) and

move.

MovGate: The sound will play when you place your

hand above (or touch with your finger) and

move. If a sustaining sound is selected, the

sound will continue playing until you stop

your hand or finger.

Touch: The sound will play when you place your

hand above (or touch with your finger).

TchGate: The sound will play when you place your

hand above (or touch with your finger). If a

sustaining sound is selected, it will

continue playing until you move your

hand or finger away.

Scrape * : The sound will play when you move your

hand or finger. This is used to play sounds

such as guiro.

• only D Beam

Scrp1wy * : The sound will play continuously when

you move your hand. The sound will play

for only one direction.

* Pedal can be specified the value marked with “*.”

U0101A1 PAD INST

Pad Level 100

Parameter

Value

U0101A1 PAD INST

L09:Conga Hi /H

Inst NameInst Group

(Inst select screen)

(Other value select screen)

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 115 116

Comments to this Manuals

No comments

Roland HPD-15 User Manual Page 36

Comments to this Manuals