Roland HPD-15 User Manual download pdf (Page 59)

Chapter 3

Chapter 3 Recording Your Performance (Sequencer)

You can record your performance in the sequencer.

On the HPD-15, your performance will be recorde exactly as

you play it (Realtime Recording).

The HPD-15’s sequencer consists of four parts (Percussion 1,

Percussion 2, Melody 1, Melody 2). The collective

performance of these four parts is called a pattern.

Preset patterns (pattern P01–P99)

What the various parts should play has already been

recorded.

User patterns (pattern U01–U99)

These are patterns that you can record.

Basic Settings for Recording

1. Press [SEQUENCER] to make it light; you will enter the

Sequencer mode.

fig.3-01.e

2. Turn [PATCH/VALUE] to select the user pattern for

recording your performance.

fig.3-02

3. Press [ PARAMETER] or [PARAMETER ] to

select the pattern/click parameter that you wish to set.

fig.3-03.e

4. Turn [PATCH/VALUE] to make settings for the pattern

or click.

fig.3-04.e

5. Press [REC] and you will enter the Recording Stand-by

Mode.

[PLAY/STOP] will blink.

fig.3-05.e

* If you press [REC] once again, you will return the previous

screen.

6. Press [ PARAMETER] or [PARAMETER ] to

select the recording parameter in the Recording Stand-by

Mode.

fig.3-06.e

7. Turn [PATCH/VALUE] to make settings for the

recording.

8. Press [PLAY/STOP] to start the recording.

While the recording, [PLAY/STOP] will light.

* It is possible to start/stop the recording by the foot switch (p.

71), but it is not possible by the D Beam or pedal (p. 53).

9. When you are finished recording, press [PLAY/STOP]

once again.

[REC] and [PLAY/STOP] will go dark, and the

recording will stop.

fig.3-07

10.Naming the pattern, press [WRITE].

How to naming a pattern is the same as naming a patch.

Refer to “Naming a Patch” (p. 55).

It is not possible to record to a preset pattern.

* To return to normal Play mode, Press [SEQUENCER] or

[EXIT]; [SEQUENCER] will go dark.

U01 001-01 =120

4/4 #User-001

Current Measure

Pattern Name

Pattern Number

Tempo

Current Beat

U: User

P: Preset

Displayed for an

unrecorded pattern

Time

Signature

U07 001-01 =120

4/4 #User-007

U07 SETUP

Time Sig. 4/4

Parameter

Value

Parameter Category

U07* SETUP

Length 8

Parameter Value

appears if this pattern is edited

U07*001-01 =120

RecStby Perc1

Part for Recording

U07*001-01 =120

RecMode Replace

Parameter

Value

NAME[User-001 ]

Write Rec Data?

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 115 116

Comments to this Manuals

No comments

Roland HPD-15 User Manual Page 59

Comments to this Manuals