Roland XP-80 Owner's Manual download pdf (Page 129)

Extracting and moving a part of perfor-

mance data – 10 Extract

This function extracts a specified performance data area

from a Phrase track or Pattern and moves it to the same Song

position of another Phrase track or Pattern.

It also allows you to reorganize the performance data for

MIDI channels so each channel's data is placed in its own

Phrase track– handy when the performance data for multi-

ple MIDI channels has been stored together in one Phrase

track (such as with Format 0 Standard MIDI files).

Source track

Selects a Phrase track or Pattern from which data is to be

extracted.

TRK 1–TRK 16: The specified Phrase track

PTN 001–PTN 100: The specified Pattern

Measure (From), for (to) (Editing area)

Specifies the area of measures from which data is to be

extracted.

Destination track

Selects a Phrase track or Pattern into which the data will be

inserted.

TRK ALL: The performance data of MIDI channel 1 will be

moved to Phrase track 1 and MIDI channel 16’s data moves

to Phrase track 16.

TRK 1–TRK 16: The specified Phrase track

PTN 001–PTN 100: The specified Pattern

Mode (Extract mode)

Specifies whether you want to keep the performance data at

the destination.

REPLACE: The data at the destination will be erased and

replaced by the extracted data. However, only the data of

the MIDI channels specified by the Channel parameter will

be replaced, and data of other channels at the destination

will remain.

MIX: The data at the destination will combine with the

extracted data.

Status

Selects the type of data to be extracted.

ALL: All types of performance data

NOTE: Note

P.AFT: Polyphonic Aftertouch

C.C: Controller numbers

PROG: Program numbers

C.AFT: Channel Aftertouch

BEND: Pitch Bend

EXC: System Exclusive messages

TUNE: Tune Request

PTN: Pattern Call messages

Range

If you have selected NOTE, P.AFT, C.C or PROG for the

Status parameter, use this parameter to specify the area.

To extract all Note or Polyphonic Aftertouch data, specify

“C-1–G9.” To extract C4 Note/Polyphonic Aftertouch data,

specify “C4–C4.” To extract Note/Polyphonic Aftertouch

data over the range from C3 to C4, specify “C3–C4.”

To extract all Controller numbers or Program numbers, spec-

ify “0–127.” To extract Controller/Program number 4, speci-

fy “4–4.” To extract Controller/Program numbers from 3 to

14, specify “3–14.”

Channel (MIDI channel)

Selects the MIDI channel(s) of the data to be extracted.

To extract all performance data, set this parameter to ALL.

To extract just the performance data of a specific MIDI chan-

nel, select that MIDI channel.

✳ If you set the Status parameter to EXC, TUNE or PTN,

the Channel parameter will not be available.

❶ Make sure that the Track Edit Menu display (SEQ/

TrkEdit) is up.

❷ Press [F6] (Menu) to select Menu 2, then press [F5]

(Extract) to call up the Extract display (SEQ/TrkEdit).

This display can also be called up by moving the cursor to

“10 Extract” and pressing [ENTER] on the Track Edit Menu

display (SEQ/TrkEdit). Or press the numeric keys [1] and

[0], then [ENTER].

❸ Move the cursor to the Source track and select the Phrase

track or Pattern from which you want to extract data.

❹ When assigning the editing area by measures, move

the cursor to “Measure” and specify the measure num-

ber at which extraction is to start, then move the cursor

to “for” to specify the measure length for extraction.

When using Locate positions, press [LOCATE], and move the

cursor to “From” to select the Locate number from where you

want to start extracting. Then move the cursor to “to” and

select the Locate number where you want to end extraction.

❺ Move the cursor to the Destination track and select the

Phrase track(s) or Pattern into which the extracted data

will be inserted.

❻ Move the cursor to “Mode” to specify extraction

method.

❼ Move the cursor to “Status” to select the data for

extraction.

If you select NOTE, P.AFT, C.C or P.C, move the cursor to

“Range” and specify the area. For NOTE or P.AFT, you can

specify the key range by pressing keys of the XP-80’s key-

board.

❽ Move the cursor to “Channel” and select the MIDI

channel from which you want to extract data.

❾ Press [F6] (Execute) to initiate extracting.

✳ Source and Destination parameters cannot be set to the

same setting. If you execute the operation with the

same setting, the display will show “Same Track or

Pattern Selected.” Select different Phrase tracks or

Patterns and execute the operation again.

Source track Destination track

131

Chapter 5. Editing a song

[SEQUENCER]➞[F3] (TrkEdit)➞[1]➞[0]➞[ENTER]

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 243 244

Roland XP-80 Owner's Manual Page 129

Comments to this Manuals

Roland XP-80 Owner's Manual Page 129

Comments to this Manuals

Related products and manuals for Musical Instruments Roland XP-80