Roland XP-80 Owner's Manual download pdf (Page 84)

33: ENHANCER

➞

FLANGER

This effect connects an enhancer and a flanger in series.

EH Sens (Enhancer Sensitivity) #

Adjust the sensitivity of the enhancer.

EH Mix (Enhancer Mix level)

Adjust the ratio with which the overtones generated by the

enhancer are combined with the direct sound.

Flanger Pre Delay (Flanger pre delay time)

Adjust the time delay from when the direct sound begins

until the flanger sound is heard.

Flanger Rate

Adjust the modulation speed of the flanger effect.

Flanger Depth

Adjust the modulation depth of the flanger effect.

Flanger Feedback (Flanger Feedback level)

Adjust the proportion (%) of the flanger sound that is fed

back into the effect. Negative (-) settings will invert the

phase.

Flanger Balance #

Adjust the volume balance between the enhancer sound that

is sent through the flanger and the enhancer sound that is

not sent through the flanger. With a setting of “D100: 0E,”

only the enhancer sound will be output. With a setting of

“D0: 100E,” only the enhancer sound that is sent through the

flanger will be output.

Level (Output level)

Adjust the output level.

34: ENHANCER

➞

DELAY

This effect connects an enhancer and a delay in series.

EH Sens (Enhancer Sensitivity) #

Adjust the sensitivity of the enhancer.

EH Mix (Enhancer Mix level)

Adjust the ratio with which the overtones generated by the

enhancer are combined with the direct sound.

Delay Time

Adjust the time delay from when the direct sound begins

until the delay sound is heard.

Delay Feedback (Delay feedback level)

Adjust the proportion (%) of the delay sound that is fed back

into the delay input. Negative (-) settings will invert the

phase.

Delay HF Damp

Adjust the frequency above which delayed sound fed back

to the delay input will be cut. If you do not want to cut the

high frequencies of the delay feedback, set this parameter to

BYPASS.

Delay Balance (Delay balance) #

Adjust the volume balance between the enhancer sound that

is sent through the delay and the enhancer sound that is not

sent through the delay. With a setting of “D100: 0E,” only

the enhancer sound will be output. With a setting of “D0:

100E,” only the enhancer sound that is sent through the

delay will be output.

Level (Output level)

Adjust the output level.

35: CHORUS

➞

DELAY

This effect connects a chorus and a delay unit in series.

Chorus Pre Delay (Chorus pre delay time)

Adjust the time delay from when the direct sound begins

until the chorus sound is heard.

Chorus Rate

Adjust the modulation speed of the chorus effect.

Chorus Depth

Adjust the modulation depth of the chorus effect.

Chorus Balance #

Adjust the volume balance between the direct sound and the

chorus sound. With a setting of “D100: 0E,” only the direct

sound will be output. With a setting of “D0: 100E,” only the

chorus sound will be output.

Delay Time

Adjust the time delay from when the direct sound begins

until the delay sound is heard.

Delay Feedback (Delay feedback level)

Adjust the proportion (%) of the delay sound that is fed back

into the delay input. Negative (-) settings will invert the

phase.

Delay HF Damp

Adjust the frequency above which delayed sound fed back

to the delay input will be cut. If you do not want to cut the

high frequencies of the feedback, set this parameter to

BYPASS.

Enhancer

Flanger

Enhancer

Delay

Chorus

Delay

Chapter 3. Creating your own sounds

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 243 244

Comments to this Manuals

No comments

Roland XP-80 Owner's Manual Page 84

Comments to this Manuals

Related products and manuals for Musical Instruments Roland XP-80