Roland XP-80 Owner's Manual download pdf (Page 90)

Assigning sliders, pedals and other con-

trollers (Control)

✳

The Control group consists of three display pages –

Control Assign, Pedal Assign and Control Source. To

change the display page, press [F4] (Control).

Control Assign display

This display is for assigning the function of each slider.

C1 Slider

C2 Slider

Specifies the function of the C1 slider and C2 slider, respec-

tively.

Use the Assign parameter to specify the functions controlled

by each slider.

CC01–95

: Controller numbers 1–95 (except for 6, 32–63).

PITCH BEND

: Pitch bend

AFTERTOUCH

: Aftertouch

Use the Output parameter to select the sound source(s) (the

internal sound source and/or external sound sources con-

nected to MIDI OUT connector) to be controlled by the slid-

ers.

OFF

: Neither will be controlled.

INT

: Only the internal sound source will be controlled.

MIDI

: Only external sound sources will be controlled.

INT&MIDI

: Both the internal sound source and external

sound sources will be controlled.

Sys-Ctrl1 (System Controller 1)

Sys-Ctrl2 (System Controller 2)

These parameters allow you to choose up to two controllers

for common use for controlling Patch or Performance para-

meters. The settings in each Patch (or Performance) deter-

mines which of the two controllers you choose here will

actually be used. You also need to specify the parameters to

be controlled for each Patch (or Performance).

Use the Assign parameter to specify functions controlled by

each slider.

CC01–95

: Controller numbers 1–95 (except for 6, 32–63).

PITCH BEND:

Pitch bend

AFTERTOUCH

: Aftertouch

✳

To use the selected controllers, you need to make nec-

essary System settings and Patch/Performance settings

so that the MIDI messages transmitted by the selected

controllers will be received.

✳

For most control change messages, the function per-

formed by message number is defined in MIDI specifi-

cations. Please note these settings allow you to use

control change messages without regard to officially

defined functions.

Pedal Assign display

Use this display for assigning functions to the pedals.

Pedal 1–Pedal 4

Hold Pedal

Specifies the functions of Pedals 1–4 and the Hold Pedal.

Use the Assign parameter to specify the functions controlled

by each pedal.

✳

Hold Pedal's Assign is fixed at CC64: HOLD-1.

CC01–95

: Controller numbers 1–95 (except for 6, 32–63).

PITCH BEND

: Pitch bend

AFTERTOUCH

: Aftertouch

PROG-UP

: Every press of the pedal selects the next

Performance number, Patch number, or Rhythm Set.

PROG-DOWN

: Every press of the pedal selects the previous

Performance number, Patch number, or Rhythm Set.

START/STOP

: Every press of the pedal makes the sequencer

alternate between playback and stop.

PUNCH-I/O

: Every press of the pedal makes the sequencer

alternate between starting and stopping manual punch-in

recording.

TAP-TEMPO

: Tap tempo (a tempo specified by the interval

at which you press the pedal).

OCT-UP:

Each pedal press raises the key range in octave

steps (up to 3 octaves higher).

OCT-DOWN:

Each pedal press lowers the key range in

octave steps (up to 3 octaves lower).

Use the Output parameter to select the sound source(s) (the

internal sound source and/or external sound sources con-

nected to MIDI OUT connector) to be controlled by the

pedal.

OFF

: Neither will be controlled.

INT

: Only the internal sound source will be controlled.

MIDI

: Only external sound sources will be controlled.

INT&MIDI

: Both the internal sound source and external

sound sources will be controlled.

Chapter 3. Creating your own sounds

[SYSTEM]

➞

[F4] (Control)

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 243 244

Roland XP-80 Owner's Manual Page 90

Comments to this Manuals

Roland XP-80 Owner's Manual Page 90

Comments to this Manuals

Related products and manuals for Musical Instruments Roland XP-80