Roland VK-7 Owner's Manual download pdf (Page 64)

64

Troubleshooting

Click is heard when you press/re-

lease a key

On a tone wheel organ, a slight

“blip” noise is heard when you press

or release a key. Initially, this was

considered a defect, but as organs

with this characteristic came to be

used in a wide range of music, it

grew to be considered part of the

sound. The VK-8 faithfully simu-

lates this key click noise, which is

characteristic of tone wheel organs.

The volume of the click can be ad-

justed with “ON CLICK LEVEL”

and “OFF CLICK LEVEL.”

p. 51

Pitch is incorrect

Tuning is incorrect.

Adjust the reference pitch. p. 55

Key Transpose (transposition) is in

effect.

Either cancel Key Transpose, or

change its setting.

p. 55

Glide has been assigned to the con-

trol pedal.

If Glide is assigned when no foot

switch or control pedal is connected

to the CONTROL PEDAL jack, the

pitch may be incorrect.

Either connect a foot switch or con-

trol pedal to the CONTROL PEDAL

jack, or assign a function other than

Glide to the control pedal.

p. 40

Wheel Brake is assigned to the con-

trol pedal.

If Wheel Brake is assigned when no

foot switch or control pedal is con-

nected to the CONTROL PEDAL

jack, the pitch may be incorrect.

Either connect a foot switch or con-

trol pedal to the CONTROL PEDAL

jack, or assign a function other than

Wheel Brake to the control pedal.

p. 41

Ring Modulator is applied to the or-

gan voice.

Operate the control pedal or the D

Beam to defeat the ring modulator.

p. 35

Overdrive is not applied

Overdrive level is too low.

Turn the [OVERDRIVE] knob to ad-

just the depth of overdrive.

p. 33

The expression pedal has been

rocked toward the front.

While carefully monitoring the vol-

ume, depress the toe of the pedal.

p. 39

Overdrive will not be applied to the

Other Tones.

This is not malfunction. - - -

Reverb is not applied

Reverb level is too low.

Turn the REVERB [LEVEL] knob

clockwise to adjust the reverb level.

p. 37

Rotary effect is not applied

The ROTARY SOUND [ON] button

is turned off (dark).

Press the ROTARY SOUND [ON]

button to turn it on (lit).

p. 32

The [BRAKE] button is on (lit).

Either turn the [BRAKE] button off

(dark) or press the [SLOW/FAST]

button, so that the brake will be re-

leased, and rotary will be applied.

p. 32

Can’t set the MIDI channel

This is already specified as the MIDI

channel of another part.

Either select a different channel for

the other part that is using that chan-

nel and then make the desired set-

ting, or select a MIDI channel that no

other part is using.

p. 54

You are attempting to set the MIDI

channel of the Other Tones, Drum,

or spring shock to the MIDI channel

that has been specified as the Con-

trol MIDI Channel.

It is not possible to set the MIDI

channel of the Other Tones, Drum,

or spring shock to the same channel

as the Control MIDI Channel.

p. 54

Problem

Check Solution Page

VK-8_e.book 64 ページ２００５年７月２５日　月曜日　午後４時２４分

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 83 84

Comments to this Manuals

No comments