Roland VS-640i User Manual Page 101
- Page / 176
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
99
4
Part of
Practice
Fully Utilize the Media Heating System
What Is the Media Heating System?
This machine is equipped with a media heating system that warms the media. You use this mainly to improve
ink adhesion and also dry the ink. You can adjust the temperature settings to match the type of media and
the printing speed.
WARNING
CAUTION: high temperatures
The platen and dryer become hot. Exercise caution to avoid re or burns.
WARNING
Remove any loaded media or switch off the sub power when printing is
not being performed.
The continued application of heat at a single location may cause re or produce
toxic gases.
WARNING
Never use media that cannot withstand the heat.
Doing so may result in re or the release of toxic gases, or may degrade the
media.
WARNING
Never use the platen or dryer for any purpose for which they are not
intended, such as to dry clothing.
Doing so may cause overheating, resulting in re or accident.
Use at an ambient temperature of 20 to 32°C (68 to 90°F).
If the machine is used at an ambient temperature lower than 20°C (68°F), then depending on the type or
width of the media, wrinkling or temperature-caused unevenness may occur. If this happens, try lowering
the temperature of the media heating system by about 2°C. To obtain stable printing results, however, the
machine should be used at an ambient temperature of 20 to 32°C (68 to 90°F).
Print heater
You use this mainly to improve ink adhe-
sion.
Dryer
You use this to speed up drying of
the ink.
- USER'S MANUAL 1
- Contents 3
- Chapter 1 7
- Machine Highlights 7
- Part Names and Functions 8
- Operation Panel 10
- Menu List 11
- Language and Unit Menu 14
- Function Menu 15
- To Ensure Safe Use 16
- Machine 17
- Highlights 17
- WARNING 18
- CAUTION 20
- Warning Labels 22
- Avis sur les avertissements 23
- ATTENTION 23
- PRUDENCE 23
- À propos des symboles 23
- Printer Unit 31
- Ink Cartridges 31
- Chapter 2 33
- Basic Operation 33
- Prepare the Media 34
- Usable Media 35
- Switch On! 36
- Loading Media 37
- Operation 38
- CAUTION 39
- Close the front cover 43
- Loading the Sheet Media 44
- Setup of Media 48
- Adjusting the Head Height 49
- Setting the blade force 52
- Saving the Setting as Preset 58
- Outputting 59
- Printing Tests and Cleaning 60
- Important Note on Cutting 61
- Carrying out the cutting test 62
- Starting Output 65
- Pausing and Canceling Output 66
- Cutting Off the Media 66
- Switch Off 68
- Chapter 3 69
- Maintenance: 69
- Checking for Remaining Ink 70
- How to Replace Ink Cartridges 71
- Maintenance of Ink Cartridges 72
- Disposing of Discharged Ink 72
- Cleaning 74
- Daily Care and Maintenance 75
- Periodic Care and Maintenance 75
- Medium/ Powerful Cleaning 76
- Maintenance 77
- Manual Cleaning of Print Head 78
- Remove cover R 80
- Attach the cover R 81
- Attach the cover L 81
- About [CIRCULATE INK] menu 85
- Replacing Consumable Parts 86
- Replace the wiper 87
- Attach the hook 88
- Replacing the Felt Wiper 89
- Replace the felt wiper 90
- Attach the Hook 91
- Replacing the Blade 92
- Replace the separating knife 94
- Keep Performing Maintenance 96
- Alarm Feature 96
- Chapter 4 97
- Part of Practice 97
- Loading a Saved Preset 100
- WARNING 101
- Procedure 102
- Description 103
- Default Setting 104
- Printing Hard-to-dry Media 110
- Using Transparent Media 110
- Using Sticky Media 114
- Peel off the circle 118
- Peel off the rectangle 118
- Part of 119
- Practice 119
- Printing with Crop Marks 125
- Aligning Manually and Cutting 129
- Using Media Take-up System 133
- Chapter 5 135
- To Administrators 135
- Output Operation Management 136
- System Management of Printer 140
- Administrators 144
- Chapter 6 145
- Read this chapter 145
- Printer Does Not Start Up! 146
- Cannot cut off the media 147
- Colors Are Unstable or Uneven 149
- P. 72, "Cleaning" 150
- P. 35 “Loading Media” 151
- Media Jam Occurs! 152
- Media Feed is Not Smooth 153
- Media Feed Is Not Straight 154
- Media Feed Is Not Smooth 154
- Print Head Stops Moving. Why? 155
- A Message Appears 157
- [OPEN THE VALVE] 158
- An Error Message Appears 159
- P. 35, “Loading Media” 160
- Chapter 7 163
- Main Specications 163
- Printing/Cutting Area 164
- Specications 165
- About the Blade 166
- R4-100903 176
Related products and manuals for Print & Scan Roland VS-640i
Print & Scan Roland XR-640 User Manual
(80 pages)
(80 pages)
Print & Scan Roland PC-600 User Manual
(56 pages)
(56 pages)
Print & Scan Roland PNC-950 User Manual
(41 pages)
(41 pages)
Print & Scan Roland XR-640 User Manual
(4 pages)
(4 pages)
Print & Scan Roland LEC-540 Setup Guide
(64 pages)
(64 pages)
Print & Scan Roland LEC-540 User Manual
(2 pages)
(2 pages)
Print & Scan Roland RA-640 Specifications
(36 pages)
(36 pages)
Print & Scan Roland FJ-52 User Manual
(78 pages)
(78 pages)
Print & Scan Roland VS-640i User Manual
(9 pages)
(9 pages)
Print & Scan Roland LEC-300 Specifications
(56 pages)
(56 pages)
Print & Scan Roland CX-400 Specifications
(64 pages)
(64 pages)
Print & Scan Roland CX-400 User Manual
(24 pages)
(24 pages)
Print & Scan Roland LEC-300A Setup Guide
(68 pages)
(68 pages)
Print & Scan Roland SJ-600 User Manual
(10 pages)
(10 pages)
Print & Scan Roland PC-12 User Manual
(10 pages)
(10 pages)
Print & Scan Roland BN-20 User Manual
(2 pages)
(2 pages)
Print & Scan Roland MPX-50 User Manual
(54 pages)
(54 pages)
© 2020, manymanuals.com. All rights reserved. | 0.275 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals