Setup of Media
56
Press to select the item.
Press
to enable the setting.
For the individual setting method of this setting item and the description, refer to p. 103, "Setting the Dry-
ing Time after Printing."
11.
Saving the Setting as Preset
Press to select [SAVE].
Press
to enable the setting.
If you select [NEXT], the performed settings are retained. But your settings
are overwritten or deleted, when you operate the [Media Setting] menu
again or switch o the main power of this machine.
Use to select [Destination to Save].
You can select one of NAME1 to 8.
Press to enable the setting.
Use to select characters.
Use
to move the next character.
Select the following characters in the same way.
You can enter up to15 characters.
Press to enable the setting.
For the individual setting method of this setting item and the description, refer to p. 96, "Fully Utilizing
Preset Function."
This completes the operation of the [Media Setting] menu.
Example of setting time (general guide):
* The setting time varies according to the settings of type of media
and printing quality.
<Condition> Output accompanying pull-back; use the middle
pinch rollers; non-coated vinyl media
<Setting time> about three minutes
Drying Time after Printing
Set the drying time after the 1st page is printed. The next operation is not started until the set time
passes.
Current
setting
Setting af-
ter changed
Comments to this Manuals