Roland VS-640i User Manual download pdf (Page 35)

Prepare the Media

Basic

Operation

Usable Media

This machine cannot necessarily print every kind of media. When selecting media, be sure to carry out testing

in advance to make sure that satisfactory printing quality is obtained.

Size

Width (For both Roll Media and sheet media)

64-inch model: 210 to 1625 mm (8.3 to 64 inches)

54-inch model: 210 to 1371 mm (8.3 to 54 inches)

42-inch model: 210 to 1071 mm (8.3 to 42 inches)

30-inch model: 210 to 762 mm (8.3 to 30 inches)

A) Cuttable media thickness (For both Roll Media and sheet media)

0.08 mm to 0.22 mm (0.3 to 1 mil) (depending on media composition)

B) Maximum media thickness (For both Roll Media and sheet media)

Printing only:1.0 mm (4mil)

When performing cutting: 0.4 mm (1.6 mil)

Roll outer diameter

210 mm (8.2 inches)

Paper tube (core) inner diameter

76.2 mm (3 inches) or 50.8 mm (2inches)

Note: To use 2 inches media, the optional media anges are required. For information about optional items,

contact your authorized dealer or us.

Roll weight

64-inch model: 40 kg (88 lb.)

54-inch model: 30 kg (66 lb.)

42-inch model: 25 kg (55 lb.)

30-inch model: 25 kg (55 lb.)

Note: When using the take-up unit, conditions are dependent on the usable media of the take-up unit.

Other conditions

Media such as the following cannot be used.

 Media whose end is attached to the paper tube (core)

 Media which is severely warped or which has a strong tendency to reroll

 Media that cannot withstand the heat of the media heating system

Media whose paper tube (core) is bent or crushed

 Media that bends under its own weight when loaded

 Media on a sagging roll

 Media that is rolled unevenly

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 175 176

No comments

Roland VS-640i User Manual Page 35