Roland VS-640i User Manual Page 49
- Page / 176
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Setup of Media
47
Use to set the temperature.
Recommended temperature: 40 degrees (104°F)
Press to enable the setting.
For the individual setting method of this setting item and the description, refer to p. 100, "Making the
Temperature Setting for the Media Heating System."
3.
Adjusting the Head Height
Press to select [CHANGE].
Press
to enable the setting.
When the left gure is displayed, open the front cover.
Move the height-adjustment lever to adjust
the head height.
When moving to the [High] direction, the buzzer
sounds twice, and to the [Low] direction, the buzzer
sounds once.
Close the front cover.
For the individual setting method of this setting item and the description, refer to p. 107, "Adjusting Head
Height to Match Media Thickness."
DRYER
OFF 40℃
To cancel the setting
Procedure
Press during the setting.
Press to select [YES].
Press
.
The screen returns to the screen shown at the left.
By selecting [NO], the screen returns to the screen displayed
when you pressed
.
QUIT SETTING?
YES [NO]
MENU
MEDIA SETTING
HEAD HGT LOW
[CHANGE] NEXT
HEAD HEIGHT
HIGHT
LOW
Normally set to [Low]. For the media that is wrinkled
and comes loose from the platen, set to [High].
High
Low
Height-adjustment lever
Move rmly, until it stops.
Current preset
temperature
Temperature
to be set
2
Basic
Operation
- USER'S MANUAL 1
- Contents 3
- Chapter 1 7
- Machine Highlights 7
- Part Names and Functions 8
- Operation Panel 10
- Menu List 11
- Language and Unit Menu 14
- Function Menu 15
- To Ensure Safe Use 16
- Machine 17
- Highlights 17
- WARNING 18
- CAUTION 20
- Warning Labels 22
- Avis sur les avertissements 23
- ATTENTION 23
- PRUDENCE 23
- À propos des symboles 23
- Printer Unit 31
- Ink Cartridges 31
- Chapter 2 33
- Basic Operation 33
- Prepare the Media 34
- Usable Media 35
- Switch On! 36
- Loading Media 37
- Operation 38
- CAUTION 39
- Close the front cover 43
- Loading the Sheet Media 44
- Setup of Media 48
- Adjusting the Head Height 49
- Setting the blade force 52
- Saving the Setting as Preset 58
- Outputting 59
- Printing Tests and Cleaning 60
- Important Note on Cutting 61
- Carrying out the cutting test 62
- Starting Output 65
- Pausing and Canceling Output 66
- Cutting Off the Media 66
- Switch Off 68
- Chapter 3 69
- Maintenance: 69
- Checking for Remaining Ink 70
- How to Replace Ink Cartridges 71
- Maintenance of Ink Cartridges 72
- Disposing of Discharged Ink 72
- Cleaning 74
- Daily Care and Maintenance 75
- Periodic Care and Maintenance 75
- Medium/ Powerful Cleaning 76
- Maintenance 77
- Manual Cleaning of Print Head 78
- Remove cover R 80
- Attach the cover R 81
- Attach the cover L 81
- About [CIRCULATE INK] menu 85
- Replacing Consumable Parts 86
- Replace the wiper 87
- Attach the hook 88
- Replacing the Felt Wiper 89
- Replace the felt wiper 90
- Attach the Hook 91
- Replacing the Blade 92
- Replace the separating knife 94
- Keep Performing Maintenance 96
- Alarm Feature 96
- Chapter 4 97
- Part of Practice 97
- Loading a Saved Preset 100
- WARNING 101
- Procedure 102
- Description 103
- Default Setting 104
- Printing Hard-to-dry Media 110
- Using Transparent Media 110
- Using Sticky Media 114
- Peel off the circle 118
- Peel off the rectangle 118
- Part of 119
- Practice 119
- Printing with Crop Marks 125
- Aligning Manually and Cutting 129
- Using Media Take-up System 133
- Chapter 5 135
- To Administrators 135
- Output Operation Management 136
- System Management of Printer 140
- Administrators 144
- Chapter 6 145
- Read this chapter 145
- Printer Does Not Start Up! 146
- Cannot cut off the media 147
- Colors Are Unstable or Uneven 149
- P. 72, "Cleaning" 150
- P. 35 “Loading Media” 151
- Media Jam Occurs! 152
- Media Feed is Not Smooth 153
- Media Feed Is Not Straight 154
- Media Feed Is Not Smooth 154
- Print Head Stops Moving. Why? 155
- A Message Appears 157
- [OPEN THE VALVE] 158
- An Error Message Appears 159
- P. 35, “Loading Media” 160
- Chapter 7 163
- Main Specications 163
- Printing/Cutting Area 164
- Specications 165
- About the Blade 166
- R4-100903 176
Related products and manuals for Print & Scan Roland VS-640i
Print & Scan Roland XR-640 User Manual
(80 pages)
(80 pages)
Print & Scan Roland PC-600 User Manual
(56 pages)
(56 pages)
Print & Scan Roland PNC-950 User Manual
(41 pages)
(41 pages)
Print & Scan Roland XR-640 User Manual
(4 pages)
(4 pages)
Print & Scan Roland LEC-540 Setup Guide
(64 pages)
(64 pages)
Print & Scan Roland LEC-540 User Manual
(2 pages)
(2 pages)
Print & Scan Roland RA-640 Specifications
(36 pages)
(36 pages)
Print & Scan Roland FJ-52 User Manual
(78 pages)
(78 pages)
Print & Scan Roland VS-640i User Manual
(9 pages)
(9 pages)
Print & Scan Roland LEC-300 Specifications
(56 pages)
(56 pages)
Print & Scan Roland CX-400 Specifications
(64 pages)
(64 pages)
Print & Scan Roland CX-400 User Manual
(24 pages)
(24 pages)
Print & Scan Roland LEC-300A Setup Guide
(68 pages)
(68 pages)
Print & Scan Roland SJ-600 User Manual
(10 pages)
(10 pages)
Print & Scan Roland PC-12 User Manual
(10 pages)
(10 pages)
Print & Scan Roland BN-20 User Manual
(2 pages)
(2 pages)
Print & Scan Roland MPX-50 User Manual
(54 pages)
(54 pages)
© 2020, manymanuals.com. All rights reserved. | 1.547 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals