Roland V-1600HD Owner's Manual download pdf (Page 18)

Connecting External Equipment

* To prevent malfunction or damage, always turn off the power on all devices before making any connections.

About Signal Formats

The signal formats listed below can be input to or output from the connectors of V-1600HD.

SDI

480/59.94i, 576/50i, 720/50p, 720/59.94p, 1080/50i, 1080/59.94i

Component

480/59.94i, 576/50i, 480/59.94p, 576/50p, 720/59.94p, 720/50p, 1080/59.94i, 1080/50i,1080/59.94p,1080/50p

Analog RGB

640x480/60(*1), 800x600/60(*1), 1024x768/60(*1), 1280x768/60(*1), 1280x1024/60(*1), 1600x1200/60, 1920x1200/60(*2)

DVI-D/HDMI

480/59.94i, 576/50i, 480/59.94p, 576/50p, 720/59.94p, 720/50p, 1080/59.94i, 1080/50i, 1080/59.94p, 1080/50p,

640x480/60(*1), 800x600/60(*1), 1024x768/60(*1), 1280x768/60(*1), 1280x1024/60(*1), 1600x1200/60, 1920x1200/60(*2)

Composite/S-Video

480/59.94i, 576/50i

* You can select 50Hz or 59.94Hz in [Frame Rate] of SYSTEM Menu.

*1 The output refresh rate is 75Hz when Frame Rate is set to 50Hz.

*2 Reduced blanking

Connect video cameras, video decks, and other SDI equipment to the SDI IN connectors. SDI input is assigned to channels 1

through 8.

fig.SDI-connection.eps

You can make either HD-SDI or SD-SDI connections to the SDI IN connectors. In cases when the aspect ratio of an input signal differs from the

output format, the output is letterboxed by default. You can also use the menus to select cropping or squeezing. Refer to “Menu Operations and

Menu List” (p. 47).

Connecting Source Equipment

Connecting SDI Equipment

1 ... 17 18 19 ... 68

No comments

Roland V-1600HD Owner's Manual Page 18