Roland V-1600HD Owner's Manual download pdf (Page 49)

Menu Operations and Menu List

TRANSITION Menu

fig.transition-menu.eps

INPUT Menu

* When the INPUT button is illuminated, going to the PST/EFFECT section and pressing an INPUT selector lets you directly access a setting screen

for the corresponding channel.

fig.input-menu.eps

Time

Unit

This sets the length of the transition-effect time.

This selects the unit used for the time setting (seconds, seconds + frames or frames).

Wipe Pattern

Wipe 1 - 4

This selects the WIPE PATTERN button.

This makes various settings for the wipe. You can make the settings independently for buttons [1] through [4].

Pattern

Direction

Border

Width

Red

Green

Blue

This selects the pattern.

This selects the direction of the wipe.

This makes settings for the wipe border.

This sets the R value of the border color (RGB).

This sets the G value of the border color (RGB).

This adjusts the width of the border.

This sets the B value of the border color (RGB).

Ch.1 - 8

Color Space

Scaling Type

This makes settings for input on channels 1 through 8 (SDI).

Manual Scaling H

Manual Scaling V

Zoom

Position H

Position V

This selects the mode of the color space.

This selects the processing applied when a signal is input whose aspect ratio differs from the output format.

This performs horizontal expansion or reduction manually. It is enabled only when [Manual] has been selected using [Scaling Type].

This performs vertical expansion or reduction manually. It is enabled only when [Manual] has been selected using [Scaling Type].

This adjusts the enlargement factor of the picture.

This adjusts the horizontal position of the picture.

This adjusts the vertical position of the picture.

Selectable / Locked

When this is set to [Selectable], you can select the channel. When this is set to [Locked], you cannot select the channel.

Format

This limits the input format. When this is set to [Auto], all inputtable formats are supported.

Deinterlacing

To keep input unchanged, select [Normal]. To apply motion correction, select [Motion Adaptive].

Ch.9 - 12

This makes setting for the input on channels 9 through 12 (RGB, component, DVI-D, and HDMI).

Flicker Filter

This switches flicker prevention on or off.

Ch.13

This makes settings for input on channel 13 (analog SD).

Brightness

This adjusts the brightness.

Contrast

This adjusts the contrast.

Saturation

This adjusts the saturation.

Auto Sampling

This executes sampling automatically.

Sampling Position H

This adjusts the horizontal sampling-start location.

Sampling Position V

This adjusts the vertical sampling-start location.

Sampling Frequency

This adjusts the sampling frequency.

Sampling Phase

This adjusts the sampling phase.

Setting items other than those described below are the same as for channels 1 through 8.

The setting items are the same as for channels 1 through 8, except that sampling-related items are not available.

Ch.14

This makes settings for channel 14 (background and still image).

Setting items other than those described below are the same as for channel 13. During background output, only the settings for R/G/B are enabled.

Memory Area

This specifies the still-image import area.

1 ... 48 49 50 ... 68

Comments to this Manuals

No comments

Roland V-1600HD Owner's Manual Page 49

Comments to this Manuals

Related products and manuals for Mixers Roland V-1600HD