Roland V-1600HD Owner's Manual Page 63
- Page / 68
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
63
Appendices
fig.specification-E.eps
* When Sync Reference is set to [External], the resolution of 800 x 600 and refresh rate of 60 Hz are no longer compliant with the VESA standard.
This means that display on some devices may not be possible in this situation.
* This unit is a Class A device under FCC Part 15.
* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
A name plate bearing the power consumption, model name, and serial number of the V-1600HD is attached at the location
shown below.
fig.name-plate.eps
Main Specifications
Name Plate
Effects
Transition Mix, Cut, FAM, NAM, Wipe (9 patterns)
Composition
PinP, Chroma Key, Luminance Key, Split, DSK
Others
Output Fade, Edge Blending, Dual Screen, Span Screen
Others
Power Consumption
90 W
Dimensions
482(W) x 319.4(D) x 206.2 (H) mm
19 (W) x 12-5/8(D) x 8-1/8 (H) inches
* EIA-7U Rack Mount Size
Weight
8.1 kg
17 lbs 14 oz
Accessories
Power Cord,
Owner's Manual
Input/Output Level and Impedance
Analog HD/RGB
1.0Vp-p, 75ohms
0.7Vp-p, 75ohms (H, V : 5VTTL)
Composite
Luminance Signal : 1.0Vp-p, 75ohms
Chrominance Signal : 0.286Vp-p, 75ohms (NTSC)
0.3Vp-p, 75ohms (PAL)
S-Video
Output Connectors
Analog Video (SD)
Analog Video
(Component)
DVI-D
HD/SD-SDI
S-Video (4 pin mini DIN type) x 1
Composite (BNC type) x 1
Y/Pb/Pr (BNC type) x 1
HD DB-15 type x 1
* HD DB-15 type : combined use with analog RGB
Analog RGB
HD DB-15 type x 1
* Combined use with analog HD (Component)
Single Link Type x 2
BNC type x 2
* Conforms to SMPTE 259M-C, SMPTE 292M
TALLY
HD DB-15 type x 3
* Input (max): 12 V, 200 mA Open collector Type
Remote
MIDI : 5 pin DIN type (IN, OUT/THRU)
RS-422 : D-Sub 9 pin type x 1
USB port (host)
A type x 1 (for USB memory)
REFERENCE
BNC type (IN, THRU)
* Black Burst (Sync to frames), Bi-Level, Tri-Level Sync
Other Connectors
Video Processing
Processing
4:2:2 (Y:Cb:Cr), 10 bit
Supported
Formats
Video
RGB
480/59.94i, 576/50i,
480/59.94p, 576/50p
720/59.94p, 720/50p
1080/59.94i, 1080/50i
1080/59.94p, 1080/50p
640 x 480 / 60 Hz (*1), 800 x 600 / 60 Hz (*1),
1024 x 768 / 60 Hz (*1), 1280 x 768 / 60 Hz (*1),
1280 x 1024 / 60 Hz (*1), 1600 x 200 / 60 Hz,
1920 x 1200 / 60 Hz (*2)
* Conforms to VESA DMT Version 1.0 Revision 10
*1 Output refresh rate is 75 Hz when system frame
rate is set to 50 Hz
*2 Reduced blanking
Windows (R) Bitmap File (.bmp)
* Maximum 1900 x 1200 pixels,
24 bit per pixel, uncompressed
Still
Image
Input Connectors
Analog Video (SD)
Analog Video
(Component)
DVI-D
HD/SD-SDI
S-Video (4 pin mini DIN type) x 1
Composite (BNC type) x 1
* Loop thru connectors are equipped for all inputs
Y/Pb/Pr (BNC type) x 2
HD DB-15 type x 2
* Combined use with Analog RGB
Analog RGB
R/G/B/H/V (BNC type) x 2
HD DB-15 type x 2
* Combined use with Analog Video (Component)
Single Link Type x 2
BNC type x 8
* Conforms to SMPTE 259M-C, SMPTE 292M
- Owner’s Manual 1
- IMPORTANT SAFETY INSTRUCTIONS 2
- SAVE THESE INSTRUCTIONS 2
- Check the included items 3
- USING THE UNIT SAFELY 4
- IMPORTANT NOTES 6
- Contents 7
- Power Supply 9
- About the Cord Hook 10
- Turning the Power On and Off 11
- Part Names and Functions 12
- Rear Panel 15
- SD IN/OUT Section 16
- RGB/COMPONENT IN/OUT Section 16
- SDI IN Section 17
- DVI-D/HDMI IN/OUT Section 17
- Connecting External Equipment 18
- 1. Display the INPUT menu 19
- 2. Display the channel 19
- 3. Change the assignment 19
- Connecting a Computer (RGB) 20
- Connecting a Computer (DVI-D) 21
- Connecting HDMI Equipment 22
- Connecting Output Equipment 23
- Connecting a Source Monitor 24
- Tally Output 24
- Selecting the Output Format 25
- About Output Formats 26
- 2. Set the transition time 28
- 5. Switch the output video 29
- 4. Switch the output video 30
- Compositing the Pictures 31
- 3. Turn on the key 34
- Compositing Using DSK 35
- KEY only KEY and PinP 37
- 1. Output the video 38
- Applying Fade to Final Output 39
- Outputting a Still Image 40
- 5. Select the size 41
- 12. Output channel 14 42
- 1. Display the OUTPUT menu 44
- 2. Change the output point 44
- 3. Exit the menu 44
- PGM PVW AUX 45
- Changing a Source 46
- 2. Select the connector 46
- 3. Change the source 46
- 4. Exit the menu 46
- Menu Operations and Menu List 47
- Menu List 48
- TRANSITION Menu 49
- INPUT Menu 49
- OUTPUT Menu 50
- SYSTEM Menu 51
- Save to MEMORY 52
- Not Saved to MEMORY 52
- Saving the Current Settings 53
- Recalling Saved Settings 53
- 4. Edit the file name 55
- 6. Exit the menu 55
- 1. Display the SYSTEM menu 56
- 2. Select [Factory Reset] 56
- 3. Execute the factory reset 56
- Multi-Screen Modes 57
- AUX Mode 58
- Split Mode 59
- Span Mode 60
- Dual Mode 61
- Appendices 62
- Main Specifications 63
- Name Plate 63
- Troubleshooting 64
- For China 66
- For EU Countries 67
- *5100016962-02* 68
Related products and manuals for Mixers Roland V-1600HD
Mixers Roland CPM-300 User Manual
(26 pages)
(26 pages)
Mixers Roland SP-202 User Manual
(47 pages)
(47 pages)
Mixers Roland SRQ-4015 User Manual
(48 pages)
(48 pages)
Mixers Roland M-480 User Manual
(2 pages)
(2 pages)
Mixers Roland V-1600HD User Manual
(8 pages)
(8 pages)
Mixers Roland M-480 Owner's Manual
(17 pages)
(17 pages)
Mixers Roland M-1000 User Manual
(26 pages)
(26 pages)
Mixers Roland V-4EX Owner's Manual
(64 pages)
(64 pages)
Mixers Roland V-4 User Manual
(4 pages)
(4 pages)
Mixers Roland SRQ-4015 User Manual
(1 pages)
(1 pages)
Mixers Roland SRQ-4015 User Manual
(8 pages)
(8 pages)
© 2020, manymanuals.com. All rights reserved. | 0.045 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals