Roland V-1600HD Owner's Manual download pdf (Page 51)

Menu Operations and Menu List

SYSTEM Menu

fig.system-menu2.eps

* Refer to the next page for items to save or not save when [System] in [Memory Store Parameters] is turned to ON.

Bus Structure

Frame Rate

Sync Reference

Sync Clock Adjust

Sync Line Adjust

NTSC Setup Level

This changes the mode and alters the internal signal flow.

This changes the frame rate of video input and output.

This changes the black setup level for NTSC.

This adjusts the timing of the synchronizing signal.

This adjusts the position of the synchronizing signal.

This changes the source of the synchronizing signal.

* Set this to [Internal] when Frame Rate setting is [50Hz] and output format is RGB.

Memory Store Parameters

PinP

Key

Transition

DSK

Input

Output

System *

Cross Point

Still Image

This selects the item to save to a MEMORY button.

This saves the PinP settings.

This saves the key-compositing settings.

This saves the transition-effect settings.

This saves the On/Off and DSK settings.

This saves the input settings.

This saves the output settings.

This saves the system settings.

This saves the channel-selection state plus On/Off state of Key and PinP .

This saves the file name of an imported still image.

USB Memory

Parameter Storage

Still Image

Format

LCD

Brightness

Contrast

Back Light

LED Dimmer

Video Fader Calibrate

Test Pattern

Factory Reset

Load

Save

Save As

Delete

This saves settings to a USB memory device and imports saved settings.

This imports saved settings.

This saves the current settings by overwriting.

This newly saves the current settings.

This deletes a settings file from the USB memory device.

This makes settings for still images and imports still-image files.

Size

Memory Area 1

Memory Area 2

Memory Area 3

This sets the size of the still image.

This imports a still image to Memory Area 1.

This imports a still image to Memory Area 2.

This imports a still image to Memory Area 3.

Memory Area 4

This imports a still image to Memory Area 4.

This formats a connected USB memory device.

This adjusts the contrast of the monitor screen.

This adjusts the brightness of the monitor screen.

This adjusts the backlight of the monitor screen.

This adjusts the brightness of buttons and indicators.

This performs calibration of the video fader.

This outputs a test pattern.

* Turns off when start up this unit regardless to previous setup.

This restores the V-1600HD to its factory-default state.

Tally Signal Assign

MIDI

Remote

Destination

This selects the connector number and pin number.

Signal

This makes settings for tally output.

This selects the channel to assign to the connector and pin chosen using [Destination].

This makes settings for MIDI.

Active Connector

This selects the connector for remote control.

This makes settings for remote control.

Output Fade

Time

Red

Green

Blue

This sets the length of the fade time.

This sets the R value of the fade color (RGB).

This makes settings for the OUTPUT FADE button.

This sets the G value of the fade color (RGB).

This sets the B value of the fade color (RGB).

Memory Protect

This prohibits saving that overwrites existing settings in MEMORY.

* Paremeters for MIDI settings are described in the reference document for remote control. Download the document from the following Roland website.

http://www.rolandsystemsgroup.net/

1 ... 50 51 52 ... 68

Comments to this Manuals

No comments

Roland V-1600HD Owner's Manual Page 51

Comments to this Manuals

Related products and manuals for Mixers Roland V-1600HD