Roland Vs-880 Owner's Manual download pdf (Page 117)

116

VS-880 Application Guide

Sync multiple VS-880’s together

If you need additional tracks, you can link several VS-880s together.

SYNC:

You can use Digital Word Clock to synchronize the timing of multiple VS-880s. Make sure that the

sampling rate for the current song is the same on all units and that all units, with the exception of the final

VS-880 in the chain, have their master clock set to Digital. Check that the master VS-880 is set to transmit

system exclusive messages as the MMC master and that all other VS-880s are set to receive system

exclusive messages as MMC slaves.

AUDIO:

You can connect the Digital Out port from the slave units to the Digital In port of the next VS-880 in the

chain. If you are in INPUT MIX /TRACK MIX mode, turn Channel Link on for input 5 on all units with the

exception of the final VS-880 in the chain. You can use the channel 5 faders (in INPUT MIX) on each of the

VS-880s to control the overall level of the unit connected to its Digital In port. The audio from all units will

be present in the mix output of the master VS-880.

If you are in INPUT>TRACK mode, set the master Stereo In to Digital, and the master Stereo In Balance to

zero for all units with the exception of the final VS-880 in the chain. You can use the master Stereo In Level

on each of the VS-880’s to control the overall level of the unit connected to its Digital In port. The audio

from all units will be present in the mix output of the master VS-880.

1 ... 116 117 118 ... 142

No comments

Roland Vs-880 Owner's Manual Page 117