Roland Vs-880 Owner's Manual download pdf (Page 91)

VS-880 Application Guide

What if you have a song with 3 chorus sections but you have the perfect background vocals recorded on Tr.

6-1 for the first chorus only? It would be extremely helpful to be able to use the first chorus background

vocals for the other 2 chorus sections.

Again using the {COPY} command, you can select the first chorus recording on tracks Tr. 6-1 as the

‘START’ and ‘END’ of the section to be copied. You can then instruct the VS-880 to {COPY} this

background vocal section to the second and then to the third chorus. You will first specify the beginning of

the second chorus as your COPY TO location and then choose the third chorus as the COPY TO location.

(For more - see the VS-880 V-Xpanded Owner’s Manual, Chapter 4).

ACTION: Use {Copy} To Re-Use A Vocal Background In

Multiple Verses

Clear Locate Points First: Hold the [CLEAR] button and press any [LOC] buttons with lit LED.

1. Set a Locate point with [LOC 1] at the beginning of the chorus # 1.

2. Set a Locate point with [LOC 2] at the end of the chorus # 1.

3. Set a Locate point with [LOC 3] at the beginning of chorus # 2

4. Set a Locate point with [LOC 4] at the beginning of chorus # 3.

5. Press [TRACK] until “Track Copy?” is displayed.

6. Press [YES].

7. Press [NO] repeatedly until the display shows “?-?>?-?” (to clear previous track selections).

8. Press the [CH EDIT] button for the first track you want to copy from.

9. Press the [CURSOR>] button.

10. Press the [CH EDIT] button for the destination track.

11. Use the TIME/VALUE dial to select the destination virtual track

If you want to copy more than one track:

12. Press the [CURSOR>] button again until the selection screen displays “?-?>?-?”.

13. Enter the Source track by pressing the [CH EDIT] button for that track.

14. Press the [CURSOR>].

15. Enter the Destination track by pressing the [CH EDIT] button for that track.

16. Use the TIME/VALUE dial to select the destination virtual track.

Continue using the [CURSOR>] button to access the Source Track and Destination

track selection screens until you have entered all of the tracks you want to copy.

You can only use those tracks and virtual tracks that are “on top” or ready to play

as source tracks for copying. If you want to copy a virtual track that is below a

currently playing track, you must first make that virtual track the current playable

track (see V-Xpanded Owner’s Manual page 63 - Switching V-tracks).

17. Press the right [PARAMETER>>] button, “TRK St.=” should be displayed.

18. Press [LOC 1].

(Continued)

Use {Copy} To Re-Use A Vocal In Multiple Verses

1 ... 90 91 92 ... 142

No comments

Roland Vs-880 Owner's Manual Page 91