Roland Vs-880 Owner's Manual download pdf (Page 63)

VS-880 Application Guide

(Sync To An External Sequencer Using MMC, Continued)

9.Using the [<<PARAMETER>>] buttons, scroll through the various screen pages and set each

parameter to the following:

MID:DeviceID= *

MID:MIDIThr= OUT

MID:SysEx.Rx= On

MID:SysEx.Tx= Off

MID:MMC= Slave

MID:CtrLocal= *

MID:CtrType= *

MID:P.C.Scne *

MID:P.C.Eff *

MID:C.C.Eff *

* These parameters do not apply to MMC Sync and are not used here.

THE EXTERNAL SEQUENCER SETUP

10. Set the sequencer to “MMC Master” mode.

11. Set it to slave to MTC (MTC slave mode).

12. Press “PLAY” on the external sequencer – OR – press [PLAY] on the VS-880.

MIDI Clock can also be used as the sync source in this example. Follow the instruc-

tions detailed in “Using MIDI Clock” on page 60 of this guide, along with the

instructions above.

1 ... 62 63 64 ... 142

No comments

Roland Vs-880 Owner's Manual Page 63