Roland Vs-880 Owner's Manual download pdf (Page 44)

Chapter 3: Recording Applications

(Market Points, Continued)

Clearing a Marker Point

1. Locate the VS-880 to the marker point you wish to clear, hold the [CLEAR] button (in the

LOCATOR section) and press the [TAP] button.

Clear All Markers

1. Hold down the [SHIFT] and [CLEAR] buttons, then press the [TAP] button.

2. The display will show “Clear ALLMarker?”

3. Press the [YES] button.

Locator Points

Setting a Locator Point

1. While playing the piano track you just recorded, press one of the [LOC] buttons (in the

LOCATOR section) at every location you want to place a Locator point. The LED will light

when a location is stored in that button.

Moving to a Locator Point

1. To move to an active Locator point (LED is on), just press the appropriate [LOC] button..

Clearing a Locator Point

1. Hold the [CLEAR] button (in the LOCATOR section) and press the [LOC] button you wish to

clear. The LED will turn off, indicating that this location is empty and can be used to store a

new location.

Holding the [SHIFT] button when pressing a [LOC] button will access the next set

of locator numbers. For Example, [SHIFT] + [LOC] 2 locates to location # 6.

Using Locator Banks

The VS-880 provides multiple banks of Locator positions. You have 8 locator positions available directly

from the front panel (buttons for [LOC] 1-4, plus [SHIFT] = 5-8). These eight positions can be switched

between four different locator banks. For example, Bank 1 has positions 1-8, Bank 2 has positions 1-8, Bank

3 has positions 1-8 and Bank 4 has positions 1-8. This bank switching provides a total of 32 locator

positions.

1. Hold [LOCATOR] (under EDIT CONDITION) and press one of the four [LOC] buttons to

select a Locate Bank (LOC 1 will select Locate bank 1, LOC 2 will select bank 2, etc.).

1 ... 43 44 45 ... 142

No comments

Roland Vs-880 Owner's Manual Page 44