Roland Vs-880 Owner's Manual download pdf (Page 94)

Chapter 6: Mixdown Applications

Once you have your final tracks recorded and have chosen which virtual tracks you wish to use, you are

ready to mix them all to a final stereo mix. Using the analog output, you might mix to a cassette deck or

other analog tape recorder.

You will need to select the correct mixer mode for your final mixdown. Then you will make your

appropriate pan pot settings, connect your mixdown device to the analog master output, adjust your fader

levels and record your final mix on the stereo analog device.

ACTION: Mixing 8 Tracks To Stereo Analog Outputs

1. Hold [SHIFT] and press [SELECT] to select INPUT>TRACK mode (if it is not already set to

this mode).

2. Connect the MASTER OUT L and R (VS-880 rear panel) to the left and right inputs of your

mastering tape recorder.

3. Put your mastering deck in record pause mode and press [PLAY] on the VS-880.

4. Use the MASTER fader on the VS-880 and the record input level knob on your tape deck (if

it has one) to set the optimum record level (around 0 dB).

5. Use the PAN knobs and FADERS to adjust the desired level of each track.

6. Press [STOP] on the VS-880.

7. Start recording on your tape deck.

8. Press [ZERO] on the VS-880 (to return to the beginning of the song).

9. Press [PLAY] on the VS-880. Use the FADERS and PAN knobs to make any real time

adjustments to the music as it is recorded to your mixdown recorder.

10. Press [STOP] on the VS-880 and your tape deck when the song is finished.

Mixing 8 Tracks To Stereo Analog Outputs

1 ... 93 94 95 ... 142

No comments

Roland Vs-880 Owner's Manual Page 94