Roland PC-600 User Manual download pdf (Page 35)

Chapter 2 - Basic Operation

Replacing an Ink Cartridge

If an ink ribbon runs out while printing is in progress, the CARTRIDGE HOLDER LED flashes.

Follow the steps below to replace with a new ribbon cartridge.

If the ink ribbon runs out, operation stops and the

warning beep sounds. (To disable the warning beep,

on the machine, set Beep (warning beep for the ink-

ribbon cartridges) to [Disable] (see "3-2 Settings

(Making Settings on the PC-600).") )

If data is being received at this time, the

CARTRIDGE HOLDER LED for the holder

installed with the cartridge where the ink ribbon has

run out flashes simultaneously with the BUSY LED.

Open the front cover and replace with a new ribbon

cartridge of the same color.

Used-up

ribbon

cartridge

New

ribbon

cartridge

Printing resumes when the front cover is closed.

When a cartridge of a different color is installed, the

CARTRIDGE HOLDER LED flashes and printing

is not resumed.

Example:

In this case, the cartridge installed

at "2" has run out of ink ribbon.

If an ink cartridge of the same color is installed in a different cartridge holder

The cartridge of the same color is retrieved and printing continues.

However, the CARTRIDGE HOLDER LED continues to flash until the ink cartridge is replaced.

1 ... 34 35 36 ... 65

No comments

Roland PC-600 User Manual Page 35