Roland PC-600 User Manual download pdf (Page 42)

Chapter 3 - User's Reference

Setting the Cutting Parameters

At the [Cutting] tab, select the cutting line and make the setting for the cutting speed.

Bitmap data is printed, without performing cutting. Make cutting lines using vector data.

Choose the cutting method.

Specify the cutting line by color or line type.

Also, choosing [All] performs cutting for all vector

data, and choosing [None] prints all data.

Set the movement speed for the blade.

Make the settings for the output data.

When only [Printing] is selected

Only printing data is output. Data set for the cutting

lines with the [Cutting] tab is not output.

When only [Cutting] is selected

Only data set for the cutting lines with the [Cutting]

tab is output. Other data is not output.

When both [Printing] and [Cutting] are

selected

All data is output, regardless of whether it is

printing data or cutting data.

When [FormFeed] is on

When [Form Feed] is on, a feed operation takes

place and a new origin point is set after the medium

has been printed or cut.

The amount of feed is equal to the length of the

printing area for the material size.

* You can make the setting for [Cut Media After

Printing]on the [Driver Options] tab only when

[FormFeed] is selected.

Setting the Output Parameters

At the [Output Option] tab, make the settings for the ink ribbons you're using and the printing method.

From [Process], choose the printing method.

1 ... 41 42 43 ... 65

No comments

Roland PC-600 User Manual Page 42