Roland PC-600 User Manual download pdf (Page 55)

Chapter 3 - User's Reference

How to Use the Cleaning Sheet

The following details the correct usage of this cleaning sheet.

Failure to observe the following points may result in damage to the machine.

• Do not use any cleaning sheet that has a damaged surface such as cuts, tears or creases.

• The printing head can be damaged by dust.

• The Pinch rollers should be set over the black bands at either end of the sheet, to ensure that the head is restricted to the center cleaning

area of the sheet and cannot pass over marks left by the pinch rollers.

• Store the cleaning sheet in a clean place and wipe the cleaning surface with a "lint free" cloth before use.

Switch off the sub power.

Open the front cover.

Raise the sheet loading

lever.

Take out the ink-ribbon cartridge.

Ink-ribbon cartridge

Remove the blade holder.

Keep pushing the [HEAD CLEANING] Key, and

the sub power on.

Pinch roller (right)

Pinch roller (left)

2nd grit roller

from the right

Matt face is up side

Make sure the material lies

over the front and rear sensors.

Rightmost grit roller

Blade holder

Cutting carridge

Load the cleaning sheet.

Position the material, the pinch rollers, and the grit rollers at the locations shown below.

Load so that the pinch rollers descend on the black blacks on the left and right edges of the cleaning sheet.

1 ... 54 55 56 ... 65

No comments

Roland PC-600 User Manual Page 55