Roland VM-C7200 Owner's Manual download pdf (Page 11)

Getting Started

Set [POWER] to ON on the front panel of the mixing

processor.

The CTRL indicator blinks during startup. When startup is completed, the

indicator lights in green.

After the CTRL indicator on the processor has turned green,

set [POWER] to ON on the rear panel of the mixing console.

When the “Check SYSTEM CONFIGURATION” message

appears on the display, press [F2](START) to execute the start-

up procedure.

The “LEVEL METER” display appears.

fig.201

It takes a short while for the system to start up. When you turn on the power,

all connected external devices must be recognized by the system, and

certain data must be loaded.

Turn on the power of connected audio equipment (amplifiers

and speakers).

When you change settings on a digital connected device, a loud noise

may occur. Always turn down the volumes to all speaker outputs to

prevent serious damage to your equipment, before working on your

digital devices.

When connected in cascade

(Owner’s Manual

“Settings related to cascade

conection” p.41), turn on

the power of the Slave

processor (“2nd UNIT”)

first.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 99 100

No comments

Roland VM-C7200 Owner's Manual Page 11