49
Using Sub Outputs
2
Press FLEX BUS [1]-[6] (lights in red) – or hold down [SHIFT]
to select [7]-[12] (lights in green) – to select the Flex Bus to
which you want to send the signals.
The “FBUS SEND” display appears.
fig.214
3
Use the channel faders to adjust each channel’s send level to
the Flex Bus.
4
Use the [MASTER] fader to adjust the Flex Bus’ overall level.
5
Repeat Steps 1-4 to assign signals to other Flex Busses.
6
Press [CH LEVEL].
Comments to this Manuals